1585 TerrainCut | Front Rotary Mowers

Diesel engine has high-quality features to minimize operating cost

Hood open for access to engine

3-cylinder, liquid-cooled diesel engine

The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.

These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy.

Engine drawing for 1570, 1575, 1580, and 1585

Engine specifications	1550	1570	1575	1580	1585
Engine hp (kW), gross SAE J1995	25 (18.4), PS	30.9 HP (22.7 kW)	30.9 HP (22.7 kW)	38.2 HP (28.1 kW)	38.2 HP (28.1 kW)
Rated engine rpm	3000	3000	3000	3000	3000
Cylinders	3	3	3	3	3
Displacement, cu in. (L)	77 (1.27)	81 (1.3)	81 (1.3)	100.2 (1.64)	100.2 (1.64)

Key features of the engine include:

Economical cast-in block cylinder design for good cooling and long life
Indirect fuel injection (1550)
Direct fuel injection (1570, 1575, 1580, 1585)
- Injects fuel directly on top of pistons for more efficient combustion
- Delivers more horsepower per gallon of fuel
- Improves starting
- Develops more horsepower per gallon of fuel and improves starting
Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
Fuel filter with replaceable element
Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C) (optional engine coolant heater attachment assists starting under more extreme conditions)
Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
Enclosed engine compartment to keep out debris and lower sound levels
Sealed radiator compartment to keep trash and debris on outside of hood
Excellent torque for plenty of lugging power when operating in tough mowing conditions
Full-pressure lubrication for positive lubrication, even when operating on slopes
Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
90 percent to 95 percent of dirt ejected before it reaches the paper element
Secondary safety element for additional filtering
Progressive-type air restriction indicator to let operator know when the filter needs servicing
Automotive-type alternator for plenty of charge to the battery and power for accessories
75 amp for open-station models
95 amp for ComfortCab models
Automatic initiation of air heater for easier cold-weather starting
Automotive-sensing system tells operator when engine is ready to start

Rear-mounted radiators

Rear-mounted radiators (1550, 1570, 1580)

Rear-mounted radiators and air conditioner condenser (1575, 1585)

Rear-mounted radiators and air conditioner condenser (1575, 1585) are hinged and easily separated for thorough cleaning to optimize performance and uptime.

Rear-mounted radiator keeps noise away from operator and is easy to service:

Isolated engine mounting to reduce engine vibration at operator's station for more comfortable operation

Fuel tank is large capacity with convenient gauge for maximum uptime

Fuel tank

Fuel gauge (shown on 1585)

Fuel tank features:

16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.
Top draw provides clean fuel.
Fuel indicator is conveniently located.

Mower decks for TerrainCut™ Front Mowers match a wide variety of needs

Since 1998 the John Deere 7-Iron™ mower deck has demonstrated commercial quality, performance, and durability. The 7-Iron PRO and FASTBACK™ mower decks deliver an even higher-quality cut in even more diverse conditions.

1580 Front Mower

1585 Front Mower

TerrainCut Commercial Mower compatibility

Mower deck	1550	1570	1575	1580	1585
60-in. (152-cm) 7-Iron™ PRO Side-Discharge Mower Deck	X	X	X*	X*	X*
62-in. (157-cm) Fastback™ Rear-Discharge Mower Deck	X	X	X	X	X
72-in. (183-cm) 7-Iron PRO Side-Discharge Mower Deck	X	X	X	X	X
72-in. (183-cm) Fastback Rear-Discharge Mower Deck	X	X	X	X	X
72-in. (183-cm) 7-Iron V Flex Side-Discharge Mower Deck (Note: not available in Region 2)		X	X	X	X

Rear weights (R66949) are required based on machine configuration. Must also order TCB10303, rear weight mounting bracket.

* Mower deck offset for trimming capability. Vehicle track width is 2 in. (5.1 cm) wider on the discharge side of deck. This may cause the tire to drive over uncut grass on discharge side of deck.

NOTE: These mower decks will not retrofit to F900 Series or F1145 Front Mowers.

Rotate for Service (RFS™)

Mower deck showing RFS feature

Rotate for Service (RFS) feature provides access for cleaning and maintenance of the mower decks:

The rotation angle will vary depending on deck size and power unit tire size.
No tools are required to access belts.
The underside of the mower deck is easy to access.
Easy on/off design simplifies installing and removing mower decks.
Top, greaseable spindles can be accessed without removing belt covers.

The Rotate for Service position also reduces the length of the machine for trailering.

Certification

TerrainCut Front Mowers comply with ANSI B71.4 safety certification and ISO 5395.

60-in. (152-cm) 7-Iron PRO Side-Discharge Mower Deck

60-in. 7-Iron PRO Mower Deck

Features include:

Redesigned front baffle manages airflow and controls clippings better.
Spindle pocket reinforcement gives even greater structural durability.
Adjustable anti-scalp wheels help smooth out the mowing job.
Standard semi-pneumatic caster tires will not go flat from punctures.

The mower is designed to provide exceptional cut quality at higher travel speeds:

The mower deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
- Provides precision components and long deck life
- Single piece of steel means no welds to break
- Provides a smooth underside, without corners, reducing material buildup
0.75-in. (1.9-cm) solid steel bar is welded to mower deck perimeter for added strength.
The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
A deep-deck design of 5.5-in. (14-cm) delivers excellent airflow so material can be processed quickly and efficiently.
1-in. to 6-in. (2.5-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.

Unique baffling system allows grass to stand up before being cut, producing a uniform length and appearance:

Baffling system eliminates clumping, blowout, and windrowing.
Wide discharge opening provides even clipping dispersal for an excellent, finished appearance in all conditions.

62-in. (157-cm) Fastback Mower Deck

62-in. Fastback Mower Deck

The 62-in. (157-cm) Fastback rear-discharge mower is ideally suited for:

Areas where people are present
- Schools
- Parks
- Playgrounds
- Traffic areas (city boulevards, roadsides, etc.)
Conditions and applications:
- Areas with long grass and weeds
- Areas where customer is not as concerned about having a wide dispersal of grass (park areas, roadsides, etc.)
Government bids that specify a rear discharge mower.

Key features of the 62-in. (157-cm) Rear-Discharge Mower Deck include:

Mower deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel for the strength to stand up to the demanding use of commercial and municipal mowing applications.
Deck is constructed with a patented baffling system that reduces clumping and windrowing and
produces a finished appearance that competitive rear-discharge mowers cannot match.
The belt-drive system has an easy-to-adjust tension device.
- By using a spring system, the risk for over tensioning is eliminated, ensuring a long belt life and excellent performance during the season.
For easy service and maintenance, the deck can be rotated into the vertical locked service position.
Deep-deck design increases airflow so more material can be processed.
Operator can trim with either side.
- Dual side trimming increases operator productivity.
1-in. to 6-in. (2.5-cm to 15.2-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.
Gauge wheels, rollers, or side-mounted skid shoes lift the deck over uneven surfaces for a well-groomed appearance.
Double-captured anti-scalp wheels provide increased durability.
Easy lift and lock system for service purposes.
Standard semi-pneumatic caster tires will not go flat when punctured.
Spindles can be greased without removing belt shields.
1-in. (2.5-cm) cold-forged spindles are strong for long life.
- Heat-treated to provide additional strength

72-in. (152-cm) 7-Iron PRO Side-Discharge Mower Deck

72-in. 7-Iron Pro Side-Discharge Mower Deck

Features include:

Redesigned front baffle manages airflow and controls clippings better.
Spindle pocket reinforcement gives even greater structural durability.
Adjustable anti-scalp wheels help smooth out the mowing job.
Standard semi-pneumatic caster tires will not go flat from punctures.

The mower is designed to provide exceptional cut quality at higher travel speeds:

The mower deck is stamped from 7-gague, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
- Provides precision components and long deck life
- Single piece of steel means no welds to break
- Provides a smooth underside, without corners, reducing material buildup
0.75-in. (1.9-cm) solid steel bar is welded to mower deck perimeter for added strength.
The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
A deep-deck design of 5.5-in. (14-cm) delivers excellent airflow so material can be processed quickly and efficiently.
1-in. to 6-in. (2.5-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.

Unique baffling system allows grass to stand up before being cut, producing a uniform length and appearance:

Baffling system eliminates clumping, blowout, and windrowing.
Wide discharge opening provides even clipping dispersal for an excellent, finished appearance in all conditions.

72-in. (183-cm) Fastback Mower Deck

72-in. Fastback Mower Deck

The 72-in. (183-cm) rear-discharge mower deck is ideally suited for:

Areas where people are present
- Schools
- Parks
- Playgrounds
- Traffic areas (city boulevards, roadsides, etc.)
Conditions and applications:
- Areas with long grass and weeds
- Areas where customer is not as concerned about having a wide dispersal of grass (park areas, roadsides, etc.)
Government bids that specify a rear discharge mower.

Key features of the 72-in. (183-cm) Rear-Discharge Mower Deck include:

Mower deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel for the strength to stand up to the demanding use of commercial and municipal mowing applications.
Deck is constructed with a patented baffling system that reduces clumping and windrowing and
produces a finished appearance that competitive rear-discharge mowers cannot match.
The belt-drive system has an easy-to-adjust tension device.
- By using a spring system, the risk for over tensioning is eliminated, ensuring a long belt life and excellent performance during the season.
For easy service and maintenance, the deck can be rotated into the vertical locked service position.
Deep-deck design increases airflow so more material can be processed.
Operator can trim with either side.
- Dual side trimming increases operator productivity.
1-in. to 6-in. (2.5-cm to 15.2-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.
Gauge wheels, rollers, or side-mounted skid shoes lift the deck over uneven surfaces for a well-groomed appearance.
Double-captured anti-scalp wheels provide increased durability.
Easy lift and lock system for service purposes.
Standard semi-pneumatic caster tires will not go flat when punctured.
Spindles can be greased without removing belt shields.
1-in. (2.5-cm) cold-forged spindles are strong for long life.
- Heat-treated to provide additional strength
Certified to European (CE) standards

72-in. (183-cm) 7-Iron V-Flex Commercial Side Discharge Mower Deck

(NOTE: not available for Region 2.)

72-in. 7-Iron V-Flex Deck

The 72-in. (183-cm) 7-Iron V-Flex Mower Deck is suitable for those who need a rotary deck capable of following the undulations and mounding in rough or uneven areas:

Golf courses
Sports facilities
Parks and recreation facilities
Municipalities

The V-Flex deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel:

Added strength to stand up to the demanding uses on the golf course.

The deck has a patented vertical belt drive system, which allows for the deck to articulate 20 degrees above and below center. This design also allows for belts to stay clean and prevents the belt from stretching and twisting when flexing.

Mower deck specifications

	60-in. (152-cm) 7-Iron PRO Side-Discharge	62-in. (157-cm) Fastback Rear-Discharge	72-in. (183-cm) 7-Iron PRO Side-Discharge	72-in. (183-cm) Fastback Rear-Discharge	72-in (183-cm) 7-Iron-V-Flex Side-Discharge Note: not for Region 2.
Gauge (thickness)	7 gauge, 0.179 in. (4.6 mm)	7 gauge, 0.179 in. (4.6 mm)	7 gauge, 0.179 in. (4.6 mm)	7 gauge, 0.179 in. (4.6 mm)	7 gauge, 0.179 in. (4.6 mm)
Cutting height	1 to 6 in. (2.5 to 15.2 cm)	1 to 6 in. (2.5 to 15.2 cm)	1 to 6 in. (2.5 to 15.2 cm)	1 to 6 in. (2.5 to 15.2 cm)	1 to 6 in. (2.5 to 15.2 cm)
Caster wheel type	Semi-pneumatic	Semi-pneumatic	Semi-pneumatic	Semi-pneumatic	Pneumatic
Gauge wheels	Yes front and rear	Yes front and rear	Yes front and rear	Yes front and rear	Yes front and rear
Deck oscillation relative to ground plane	+/- 15 degrees	+/- 15 degrees	+/- 15 degrees	+/- 15 degrees	+/- 15 degrees
Lateral deck tilt	+/- 8 degrees	+/- 8 degrees	+/- 8 degrees	+/- 8 degrees	+/- 8 degrees
Deck installed at factory	No	No	No	No	No
Time required for one person to install or remove deck (without tools)	10 min	10 min	10 min	10 min	10 min
Time to change height of cut	3 min without tools	3 min without tools	3 min without tools	3 min without tools	3 min without tools
Belt type	Kevlar® belt	Kevlar belt	Kevlar belt	Kevlar belt	Kevlar belt
Belt shield type	Plastic	Plastic	Plastic	Plastic	Plastic
Belt shield time to remove or install	2 min or less	2 min or less	2 min or less	2 min or less	2 min or less
Blade type	High lift	Medium lift	High lift	Medium lift	Medium lift
Blade tip speed	18,000 fpm (5,486 m/min)	16,000 fpm (4,877 m/min)	18,000 fpm (5,486 m/min)	16,000 fpm (4,877 m/min)	16,000 fpm (4,877 m/min)
Blade tip speed (R2)	14,200 fpm (4.3 km/min)	14,200 fpm (4.3 km/min)	14,200 fpm (4.3 km/min)	14,200 fpm (4.3 km/min)	n.a.
Spindles	3	3	3	3	3
Deck level laterally when raised	Yes	Yes	Yes	Yes	Yes
Discharge	Side	Rear	Side	Rear	Side
Mowing width	60 in. (152 cm)	62 in. (157 cm)	72 in. (183 cm)	72 in. (183 cm)	72 in. (183 cm)
Overall width (chute down)	74 in. (188 cm)	64 in. (163 cm)	86 in. (218 cm)	74 in. (188 cm)	74 in. (188 cm)
Weight	---	---	---	---	---

Power take-off (PTO) shaft drive is easy to access for quick change of equipment

Front mower PTO shaft drive

Live, independent PTO powers a mower deck, rotary broom, or two-stage snow blower:

PTO can be engaged or disengaged on the go for greater productivity.
Hydraulic PTO clutch has delay relief valve for soft engagement.
Wet clutch design provides long life.
PTO is easily accessible.

Tires are matched to the machine size and mower widths

1550, 1570, 1575 tires

Tires

Standard drive tires:

23x10.5-12 or 23x8.5-12 (1550, 1570)
23x10.5-12 (1575)

Standard steering tires: 18x8.5-10 (4WD)

1580, 1585 tires

Standard drive tires: 26x12-12, 6 PR drive tires (1580, 1585)

Standard steering tires: 20x10.00-10, 6 PR steering tires (1580, 1585)

Optional mulching kits add versatility to the mower decks

Typical mulch kit shown

Kits are available to convert the 60-in. (152-cm) and 72-in. (183-cm) 7-Iron™ PRO Side-Discharge Mower Decks into mulching decks for use in grass and leaves.

The mulch kits include mulching blades, baffles, end covers, and attaching hardware.

Similar Mulch kits are available for the 62-in and 72-in Fastback decks as well.

Mower deck	BTC10669	Mulching kit for 60" SD
Mower deck	BTC10670	Mulching kit for 72" SD
Mower deck	BTC10545	Mulching kit for 62" RD
Mower deck	DMB210099	Mulching kit for 72" RD

Standard premium ComfortCab provides superior comfort and performance

1585 Front Mower with optional side mirrors, beacon light, rear lighting and road homologation

The ComfortCab is standard equipment on the TerrainCut™ 1575 and 1585 Front Mowers. It is one of the most comfortable and easy-to-use cabs available anywhere. This premium cab was developed using extensive research and testing, and some of the most advanced design techniques available.

Cab vehicles are designed for operators who demand superior comfort and performance:

Large-property owners
Commercial operators
Governmental agencies

Whether mowing or doing other implement work (such as use of the snow blower, rotary broom, or front blade), the TerrainCut Front Mowers have the versatility and muscle to get the job done, all while protecting the operator from the elements.

Design

Standard equipment ComfortCab (head-turning lights US-Versions only)

ComfortCab visibility from operator's seat

Operators are sure to appreciate what this cab has to offer, beginning with a design that has visibility in mind. The cab is designed with robust mounting points integrated into the rollover protective structure (ROPS).

The spacious design and carefully laid-out interior provide a full 360 degrees of visibility:

Operators enjoy an unobstructed view no matter what task is being performed.
Operator fatigue caused by awkward bending is reduced, leading to increased overall productivity.
The ample headroom and curved glass on all four sides provide a roomy interior and give operators a big-cab feel.

Climate-control system

Cab air filter (head- turning lights US-Versions only)

ComfortCab high-quality interior

Operators are well-protected from the elements with a high-performance climate-control system providing heating and air conditioning:

The climate-controlled cab makes any task more enjoyable, whether on a frigid winter day or a hot summer day.
A standard high-efficiency clean-air filter reduces dust and allergen particles.

Heater and air conditioning controls and vents

Heat and air conditioning roof vents

A high-quality climate-control system for maximum operator comfort is standard equipment with the ComfortCab on the 1575 and the 1585:

Heater and air conditioner controls are conveniently located in headliner.
Vents in the roof are located on both sides of the operator.

ComfortCab features

Superior operator comfort and visibility

Right-hand controls, instruments, and cup holder

Several features integrated into the design of the cab deliver superior operator comfort and visibility. These features include:

Ultra-quiet interior with noise dampening foam floor mats
Curved glass for 360-degree visibility and spacious interior
Raised header bar for maximum front visibility
Right-hand control center with the most frequently used controls at the operator's fingertips
Tilt steering
Removable floor
In-base equipment, deluxe cloth seat with a retractable seat belt
- Standard armrests for additional operator comfort
Inside rearview mirror for rear visibility
Interior dome light for illumination in low-light conditions
Standard sun visor to block unwanted sunlight
Creature comforts like:
- Convenient cup holder
- 12-V power supply
Integrated handle providing support for ingress and egress
Lockable, push-button entry handles
Left-side step for convenient ingress and egress (1585 only)

Optional comfort features include:

Optional dual exterior rearview mirrors for added rear visibility
Optional radio mount kit and a choice of field-installed stereos are available:
- Stereo with AM/FM, weatherband, SiriusXM® Satellite, and iPod® ready
- John Deere/Delco AM/FM stereo with single compact disc player, clock, front audio input jack for MP3 players, and weatherband
- Stereo with AM/FM, weatherband, SiriusXM Satellite, and iPod ready

Standard and optional cab operating features

Standard two-speed windshield wiper control

Optional radio

The cab has been designed with many standard features that provide ease and convenience for the operator:

Standard two-speed front windshield wiper to keep the front glass clear
Dual roof-mounted forward work lights for optimum forward visibility at night
Integrated warning lights/turn signals, protected from trees and branches
Double-spool auxiliary hydraulic valve with forward-mounted couplers (1575 base code - 2443TC; 1585 base code - 2463TC)

The cab has been designed to easily accept accessories that improve operator comfort and performance:

Pre-wired for optional accessories like a radio, rear work lights, and beacon light
Dual roof-mounted rearward work lights for optimum rearward visibility at night

Seat

Seat and controls

Comfortable cloth seat

A comfortable cloth seat is provided for the operator.

A deluxe cloth air-ride seat with retractable seat belt is in base equipment on cab models:

An ergonomically sculpted seat cushion, lumbar, adjustable seat back, air suspension, and seat armrests are combined to provide excellent operator comfort and support.
The operator can adjust suspension by increasing/decreasing pressure to place arrow in center of gauge for optimum comfort.
Using a lever located under the seat, the seat is adjustable fore and aft for operator height.
Retractable seat belts prevent belts from becoming tangled in the seat suspension and controls.

Standard lighting

Two standard front lights

Optional lighting includes:

Dual roof-mounted adjustable rear work lights
Rotating beacon light

Cab safety features

Rollover protective structure (ROPS) — certified to the highest industry standards for maximum operator protection
Operator presence system
Right-side emergency exit
Tempered safety glass in case of breakage

ComfortCab™ includes rollover protection for the operator

1585 Front Mower

The ComfortCab includes ROPS protection for the operator. A retractable seat belt is included as standard equipment.

SiriusXM is a trademark of Sirius XM Radio Inc. iPod is a trademark of Apple Inc.

Easy-to-operate controls maximize productivity

1585 Front Mower with ComfortCab

Hydrostatic power steering provides the following benefits:

Makes it easy to turn the unit, for less operator fatigue
Allows quick turns – two turns lock to lock – for excellent productivity

The steering console offers the following:

Throttle
Key switch
Headlight switch
T4 display

Operator controls (1570 shown)

Controls conveniently located

Heads-up indicator lights are always visible to the operator for easy monitoring.

Console information/warning lights include the following:

Hour meter
Engine oil pressure
Engine coolant temperature
Hydraulic oil over temperature light and alarm PTO shutdown
Air preheater
Power take-off (PTO) operation indication

Maneuverability:

Turn radius of 13 in. (33 cm)
Uncut circle of 28 in. (71.1 cm) with a 72-in. (183-cm) 7-Iron™ PRO mower deck
Deck offset and pulled rearward
Tail-follows-the-trail trimming capability with 72-in. (183-cm) side-discharge mower deck
- Steered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstacles

Master stop brake/directional foot pedals

Two-pedal foot control:

Allows operator to select speed and direction with just the touch of a toe
Keeps both hands free for steering and operating controls

Master stop brake (parking brake):

Provides stopping power to both drive wheels
Disengages the power take-off (PTO)
Disengages the optional cruise control
Used also for a parking brake

Individual turn-assist brakes and differential lock

Individual turn-assist brakes:

Provides additional traction when operating on hillsides
Ideal for tight trimming situations
Work in conjunction with hydrostatic foot controls to stop or slow the unit for turns

Differential lock:

Locks both front drive wheels together for added traction
Easily engaged with the left foot

Four-wheel drive (4WD) lever (1570 shown)

Control levers

A two-speed transaxle shift lever is standard on 1580 and 1585.

The 4WD control lever is standard on the 1550, 1570, 1575, 1580, and 1585.

Safety starting system helps protect the operator and others

1550 mowing grass

TerrainCut™ Front Mowers have an operator-presence system.

To start the engine the following conditions must be met:

Master brake must be depressed or the parking brake locked; the hydrostatic foot controls will then be in the neutral position.
PTO must be disengaged
Ignition key must be used.

In addition, once the engine is running, an interlock automatically shuts the engine and PTO off if the operator leaves the seat. To keep the engine running, the operator must disengage the PTO and set the parking brake before dismounting.

Tilt steering and headlights are standard equipment

Three-piece steering column

The three-piece steering column provides the following:

Easy access to the steering valve and electrical components
Better fit-up and appearance
Easy adjustment to accommodate all operators
Standard 50-W halogen headlights

Tilt steering

Tilt steering column

Tilt steering column allows the operator to adjust to the most comfortable position:

Allows additional clearance for platform entry and exit
More than 15 in. (38.1 cm) of travel
Works in conjunction with the seat to accommodate all operators, regardless of size

Brakes and differential lock are convenient to use for maximum productivity

Wet-disk brakes/differential lock

Wet-disk brakes are standard equipment:

Provide positive stopping power and long life
Require minimal adjustment
Individual turn brakes are located on left side of platform

The differential lock is also included as standard equipment:

Locks both front drive wheels together for extra traction, when needed
Conveniently located pedal to allow the operator to engage the differential lock with the left foot while maintaining speed and direction (forward or reverse) with the right foot

12-V power outlet is convenient to use

12-V power outlet

The 12-V power outlet can be used to recharge radios and cell phones, popular tools used by commercial cutters.

The outlet is conveniently located under the front of the seat.

Certification ensures compliance with safety standards

Rollover protective structure (ROPS)

TerrainCut Front Mowers comply with ANSI B71.4 2004 safety certification specification and ISO 5395.

Teh ROPS complies with the U.S. Occupational Safety and Health Administration (OSHA) 1928.51 standard for rollover protection and ISO 2.

Serviceability is designed-in to reduce maintenance cost and increase uptime

Engine hood

Large screened area of engine hood

Hood latch

Engine hood includes large screened area:

Minimizes the amount of material that can get to the cooling radiators
Minimizes the need to clean the hood screens

Hood latch keeps the hood securely in place, providing an optimum seal:

A single hood latch is located on top of the hood behind the seat.

Engine hood opens to the rear

Designed-in service accessibility

Designed-in service accessibility helps ensure daily maintenance is completed to keep the machine operating at peak performance.

The hood opens rearward, exposing the following:

Engine
Oil and fuel filter
Hydraulic oil cooler
Radiator check/fill

The hood can be totally removed, if necessary. The seat flips forward for access to air filter, fuse bank, engine oil dipstick, and front of engine.

Condenser release knob

Condenser tilted back to permit cleaning

Easy-to-turn knobs are provided to release the air-conditioning condenser (1575 and 1585 only) and fuel and hydraulic oil coolers so they can be tilted back to permit thorough cleaning between them and the engine coolant radiator.

Foot platform access panel

Removable foot platform

The panel on the foot platform can be removed for access to the transaxle, PTO shaft, and most linkages.

Easy-to-read daily service decal is located on the bottom of the foot platform panel:

Provides access to easily hook up driveshaft when changing implements
Makes it more likely service will be performed at the optimum time, thus ensuring the highest level of performance and uptime

Panel on foot platform removed

Removal of the foot platform gives convenient access to the driveshaft that powers the mower deck, snow blower and rotary broom:

Helps make changing from one front implement to another easier and more convenient

Hydraulic hoses have reusable O-ring seal (ORS) fittings:

ORS fittings seal at a lower torque to prevent leaks.
Fittings can be removed from a damaged hose and installed on another hose.
Downtime and cost for repairs are reduced considerably.

Rotate For Service™ (RFS) feature shown

RFS service lockout latch

RFS feature provides access for cleaning and maintenance of the mower decks:

The service-latch pin allows mower deck to lock into position to ensure deck is held in position for cleaning or service.
The top-greaseable spindle grease fittings can be accessed without removing the belt covers.

Trailering features are included to reduce the time and cost to move equipment

1550 TerrainCut™ Front Mower

1570 Front Mower with deck raised

Trailering features are designed-in for convenience:

Designed-in trailer tie-downs are located at the front and rear of the machine.
26-degree deck lift will clear the steepest trailer ramps for easy loading and unloading.
Rotate For Service™ (RFS) decks take up less room when transporting on trailers, allowing more room for other important equipment.

Mower deck shown in RFS position

Welded frame structure is made of high-strength steel

High-strength, tubular steel frame

The revolutionary tubular, high-strength welded steel frame provides durability and allows major components to be located lower in the machine:

The design results in a lower center of gravity for better stability and traction on hillsides and slopes.
Rollover protective structures (ROPS) are integral members of the frame.

Durable design

Durability features of the frame include:

Heat-treated cast-iron axles with 1.24-in. (3.15-cm) kingpins
Internal wet-disk brakes
Hydraulic power take-off (PTO) clutch, with brake
- Provides smooth engagement and long life
Hydrostatic oil cooler
O-ring seal (ORS) hydraulic fittings
Integrated, shaft-driven PTO
Sealed relays and electrical connectors
Heavy-duty, dual hydraulic cylinders
Nodular cast-iron lift arm sockets
Cast-iron rear bumper

Hydrostatic transmission and transaxle are heavy-duty to maximize uptime

Kanzaki 30-cc transmission

A Kanzaki® 30-cc transmission is used for reliable operation.

Durability features include the following:

High-capacity hydrostatic transmission and heavy-duty transaxle maximize performance and uptime and minimize cost of maintenance.
Charge pump is used to efficiently deliver oil to the transmission.
Oil cooler helps maintain optimum transmission oil temperature for superior performance and longer transmission life in the most challenging operating conditions.
Maximum forward top speed is 12 mph (19.3 km/h) on the 1550, 1570, and 1575 and 15 mph (24.1 km/h) on the 1580 and 1585.
Self-bleeding design helps keep air out of the system.

Kanzaki is a trademark of Kanzaki Kokyukoki Manufacturing Company.

Two-function mechanical rear-wheel drive for optimum use of the four-wheel drive feature

Mechanical rear-wheel drive axle

Mechanical rear-wheel drive is available as standard equipment (1550, 1570, 1575, 1580, 1585):

On-demand four-wheel drive (4WD) automatically engages and disengages as needed.
- Constantly maximizes trimming ability
- Offers better fuel economy than full-time 4WD
- Provides better steering tire wear than full-time 4WD
- Increases traction and trimming ability to allow a novice operator to mow like an expert
- Works in the forward direction only
Full-time 4WD is on at all times.
- Can be engaged or disengaged on the go
- Provides maximum traction and flotation in poor conditions
- Works in reverse as well as the forward direction
Two-wheel drive position is available on 1580 and 1585 with two-speed transaxle.
- Disengages rear axle when transporting at high ground speeds

Tail-follows-the-trail design helps avoid obstacles in turns

Tail follows the trail

1550 Front Mower with 72-in. mower deck

Tail-follows-the-trail trimming with 72-in. (183-cm) mower decks. Steered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstacles.

Maneuverability:

Turn radius - 13 in. (33 cm)

Uncut circle - 28 in. (71cm) with a 72-in. (183-cm) PRO mower deck

Deck offset for increased trim capability

Deck Sizes	60, 62, 72 in 153, 158, 183 cm
Horsepower	38.2 HP* 28.1 kW
Fuel Options	Diesel

1585 TerrainCutFront Rotary Mower

SHARE

Meet your new anytime, anywhere mower

Features