All Manuals Close Window

Safety Labels


Pictorial Safety Signs

At several important places on this machine safety signs are affixed intended to signify potential danger. The hazard is identified by a pictorial in a warning triangle. An adjacent pictorial provides information how to avoid personal injury. These safety signs, their placement on the machine and a brief explanatory text are shown in this Safety section.

Warning Hot Surface


M150678

• Stay clear of hot surfaces.

• Stay a safe distance from machine.

Read Operator’s Manual


M154538a / M154540a

• This operator’s manual contains important information necessary for safe machine operation.

• Carefully read operator’s manual before operating machine. Observe all safety rules to avoid accidents.

Keep Children Away From Mower


M154538a / M154540a

• Make sure that children stay clear of mower at all times when the engine is running.

• Stay a safe distance from the machine.

Avoid Injury From Tipping


M154538a / M154540a

• Do not drive where machine could slip or tip. Drive up and down slopes, not across.

• Do not drive on slope with more than a 11? incline.

Drawbar Load


M155881

Do not exceed recommended drawbar loads stated on label.

• Horizontal 750 N (169 lb)

• Vertical 850 N (191 lb)

Use Bypass Valve Lever Safely


M135315

• Pull out transmission bypass valve lever (tow valve) before pushing machine.

• Push in bypass valve lever before driving machine.

Avoid Injury From Loaded Spring


M133166

• Keep fingers and hands away from pinch point.

• To avoid injury from loaded spring, read Operator’s Manual before changing attachment.

DANGER - CAUTION


M128699

Picture Note: Located on battery

• Shield eyes, explosive gases can cause blindness or injury.

• No sparks, flames, smoking.

• Sulfuric acid can cause blindness or severe burns.

• Flush eyes immediately with water. Get medical help fast.

• Keep out of reach of children.

• Do not tip.

• Keep vent caps tight and level.

CE Certification, Specification and Sound Label

Model X300


M155943

• This label on your machine indicates spindle speed, mass, and sound information. It satisfies marking requirements for European Directive 98/37/EC (89/392/EEC) and 2000/14/EC standards.

CE Certification, Specification and Sound Label

Model X304


M155944

• This label on your machine indicates spindle speed, mass, and sound information. It satisfies marking requirements for European Directive 98/37/EC (89/392/EEC) and 2000/14/EC standards.

CE Certification, Specification and Sound Label

Model X320


M155945

• This label on your machine indicates spindle speed, mass, and sound information. It satisfies marking requirements for European Directive 98/37/EC (89/392/EEC) and 2000/14/EC standards.