All Manuals Close Window

Service Intervals


Servicing Your Machine

IMPORTANT: Avoid damage! Operating in extreme conditions may require more frequent service intervals:

• Engine components may become dirty or plugged when operating in extreme heat, dust or other severe conditions.

• Engine oil may lose efficiency if vehicle is operated constantly at slow or low engine speeds or with frequent short trips.


Please use the following timetables to perform routine maintenance on your machine.

After First 8 Hours

• Change engine oil and filter.

After First 50 Hours

• Check rear wheel bolt torque.

• Change transaxle oil and filter.

• Check and tighten clamps for cooling and air intake system.

• Change fuel filter.

• Check and tighten hardware.

Every 100 Hours or Annually (whichever comes first)

• Change engine oil and filter.

Every 200 Hours or Annually (whichever comes first)

• Check fan belt tension.

• Check and clean battery.

• Lubricate steering spindles, axle pivot and steering cylinder.

• Check MFWD oil level.

• Clean radiator and hydraulic oil cooler screens and cooling fins.

• Check tire pressure.

• Check and tighten clamps for cooling and air intake system.

• Change fuel filter.

• Change air cleaner elements.

• Replace spark plugs.

Every 200 Hours

• Change transaxle oil and filter.

Every 300 Hours

• Check/adjust valve lash.

Every 400 Hours or Every 2 Years (whichever comes first)

• Change engine coolant.