Less power losses result in a higher efficiency and more pulling capacity. That’s why the superior efficiency of John Deere 7R Tractors deliver up to 95 percent overall tractor efficiency.
The compact and efficient cooling package that doesn’t compromise on cooling surface has an excellent airflow with no restrictions. The 6.8L and 9.0L engines offer superior torque and fuel economy under all conditions. You can count on the high efficiency of the e23™ PowerShift™ transmission and AutoPowr™ transmission. And finally, the axle design and wide tyres up to 2.15 m (7.05 ft) in diameter put more power to the ground.
1DLG Powermixtest Nr.: 2014-0437; 10.2014; www.dlg-test.de
2DLG Prüfbericht Nr.: 6297; 2015; www.dlg-test.de
3Profi Test Results 04/2017, page 18
4DLG Powermixtest Nr.: 2015-854; 10.2015; www.dlg-test.de
Exceptional performance starts with an exceptional engine, and to build an exceptional engine you need a clear design strategy. John Deere 7R Tractor 6.8L and 9.0L engines have been designed and developed to deliver more torque and better agility with series turbocharger technology while meeting Stage V standards.
6.8L PSS engines
The 6.8L engine provides high-performance horsepower and torque. The specially designed cylinder head for better cooling, steel pistons, and a titanium turbocharger compressor wheel ensure increased uptime.
9.0L PSS engines
The 7290R and 7310R Tractors are built with John Deere 9.0L PSS engines, which have set new benchmarks for total fluid efficiency among high-horsepower tractors in the DLG PowerMix test.*
7310R pulling performance thanks to wide, constant power ranges
The 9.0L engine of the 7310R delivers peak torque at the ideal rpm within a wide constant power range to ensure tremendous pulling performance.
*DLG Powermix 10.2014, Nr.: 2014-0437
Diesel exhaust fluid (DEF) mixes with engine exhaust gases in the catalyst to reduce further nitrogen oxides (NOx). The industry-leading DEF consumption is just 2 to 3 percent of diesel use.
Cooled exhaust gas recirculation (EGR)
Precise amounts of cooled exhaust gases are mixed with incoming fresh air, lowering combustion temperatures to lower NOx output while further reducing emissions.
The dual series turbocharger with fixed geometry first stage and variable geometry second stage deliver more low-speed torque and engine responsiveness to meet varying load requirements.
Air-to-air aftercooling lowers the intake manifold air temperature and provides more efficient cooling for greater engine power and reliability.
On the road
Contractors and growers with a high level of road transport applications will benefit from the 7R’s exceptional fluid efficiency at transport. Thanks to the excellent power-to-weight ratio and the fast engine response, the 7R will boost your transport business and increase your productivity.
Catalysed exhaust filter with DOC/DPF
The diesel oxidation catalyst (DOC) and diesel particulate filter (DPF) remove particles down to 2.5 μm.
Transient engine response
The proven lifetime DPF in combination with the SCR system that has been specially developed by John Deere for our powerful engines allows the engine to respond very quickly to changing loads.
The 7R Series Tractors offer a range of transmission options to tackle the challenges of your operations: the AutoPowr™ infinitely variable transmission (IVT™) and the e23™ PowerShift™ transmission.
AutoPowr: Four modes
There are four different modes available to operate the AutoPowr transmission: Full Auto, Custom, Manual and Pedal mode, which enables you to control ground speed separately from the engine.
AutoPowr transmission with AutoClutch
With the AutoClutch feature, you can simply depress both brakes, and the transmission ratios down to a stop from any ground speed without using the clutch pedal.
AutoPowr: Smooth shifting
AutoPowr lets you shift smoothly from start-up to maximum speed with a single lever and absolutely no clutching. Just select a specific speed and AutoPowr keeps it steady by automatically responding to changing load conditions.
AutoPowr automatic response
AutoPowr lets you smoothly start-up, achieving maximum speed with absolutely no clutching. Top speed is 40 km/h (24.9 mph) at 1,290 rpm and 50 km/h (31.1 mph) at 1,620 rpm for low transport cost.
Infinite speed adjustment in all situations
AutoPowr delivers stepless and continuous power across an infinitely variable range of speeds controlled by a single lever.
Mechanical part of the power flow of 7R AutoPowr
The exclusive John Deere-built AutoPowr transmission with three ranges ensures maximum mechanical power transfer in all speed ranges.
With 55 percent to 100 percent of mechanical power flow, the AutoPowr transmission boosts the efficiency of the tractor and gets more power to the ground. The reduced hydraulic part has another positive effect: a lower oil cooling requirement and better fuel efficiency.
We offer you the flexibility to choose the right transmission to fit your needs. The e23 transmission is engineered to deliver maximum power transfer for arable farming with road transport. Alternatively, choose the intuitive functionality of the AutoPowr IVT.
e23 industry-leading technology
The John Deere unique e23 full PowerShift transmission delivers power 100 percent mechanically with its 23 forward and 11 reverse gears.
The design of this sophisticated transmission reduces the losses to a minimum and ensures the most efficient way of power transfer through the drivetrain of the tractor. This enables the operator to get more power to the ground, covering more hectares and reducing the total fuel consumption per hour.
Even gear spacing of e23 transmission
The gears are evenly spaced in the e23 transmission, with many gears in the main working range for high efficiency.
Ten fully powershiftable gears in the main working range
Ten gears in the main working range from 5 to 16 km/h (3.1 to 9.9 mph) provide the best gear for the most demanding pulling application, resulting in the highest field performance.
e23 transmission with AutoClutch
The e23 transmission combines all the benefits of a mechanical transmission with the ease of use of an AutoPowr transmission. With the AutoClutch feature, you can simply depress both brakes and the transmission shifts down to a stop from any ground speed.
e23 transmission with Efficiency Manager™ feature
Efficiency Manager allows the operator to preset the working speed and helps to save fuel by keeping the engine rpm at an optimum speed by automatically shifting up and throttling back.
The structural chassis of the 7R Series has been designed for unprecedented power density. With a robust chassis, the TLS Plus front axle providing extra drawbar pull, and a long wheelbase for additional pulling power and stability, John Deere 7R Series Tractors deliver increased productivity with high payloads, even in tough conditions.
John Deere offers a variety of tyre options for a wide range of field and transport applications. Select 2.15-m (7.05-ft) diameter rear tyres (7250R models and above) for better power transfer and higher ground clearance. You will also get sufficient traction with less ballast, reducing soil compaction.
7R Series Tractors are designed with a perfect 45:55 weight split. Wide ballasting options are available if required and can be easily installed and removed due to the self-centering guide lugs.
The EZ Ballast system exclusively enables optimal ballasting of the tractor, which is especially beneficial to growers and contractors who frequently need to switch between field and road applications.
You can add or remove the 1.7 tonnes of weight in seconds at the touch of a button without needing to step down from the cab.
Drive over the weight
There's no need to step down from the cab.
Pick up the weight
Simply use the dedicated control panel and the ballast is raised to the undercarriage (connected to existing power beyond system). A safety device will ensure unfailing locking.
Releasing the ballast is just as simple and will save transport fuel costs.
When you climb into the CommandView™ III cab, the first thing you notice is the space you have and the premium fit and finish quality. The exceptionally low 69 dB(A) makes for a more relaxed day.
Visibility is also better than ever, especially when you rotate the seat 40 degrees for a nearly unobstructed view of your attachments. All of the key tractor functions such as the throttle, transmission speed, selective control valves (SCVs), and power take-off (PTO) are at your fingertips on the smartly configured CommandARM™ console.
Visibility and comfort is better than ever, especially when you rotate the seat 40 degrees for a nearly unobstructed view of your attachments. You will feel the difference after a day of work.
The optional ActiveCommand Steering system reduces steering effort to prevent operator fatigue:
The 7R Series makes sophisticated agricultural technology easy to operate. Everything is within easy reach on the CommandARM control stack and clearly viewable on the Generation 4 CommandCenter™ display.
Ease of use
Navigation is made easy with logical menus and a comprehensive shortcut bar. With Quick Line, you can now record an AB line with just one button press.
Tailor your 7R to your needs
Choose between the 21.3-cm (8.4-in.) 4200 CommandCenter Display and 26.4-cm (10.4-in.) 4600 CommandCenter Display.
ISOBUS Agricultural Industry Electronics Foundation (AEF) certified
The Generation 4 CommandCenter display is AEF ISOBUS compliant. You can control your ISOBUS-ready implement through the Universal Terminal (UT) and run automatic section control through Task Controller (TC-SC, TC-BAS), depending on the AEF certification level of the implement.
Even faster access to advanced functions
The CommandCenter display functions just like a tablet with touchscreens; navigating through the options is simplified via menus, shortcuts, and with context-sensitive help. And you can run our field-proven mainstream AMS solutions.
Documentation made easy
Both Gen4 CommandCenter Displays are connected to the Operations Center on MyJohnDeere.com through Wireless Data Transfer (WDT). You can conveniently send setup files from the office to the field and send applied maps and totals from the field to the office.
Virtually in the cab
You or your John Deere dealer can remotely log on to the Generation 4 CommandCenter display to assist operators with machine and ISOBUS implement setup and operation. In addition, on-screen help files enable operators to get familiar with all functions.
By adding the Extended Monitor to your tractor, you can easily move functionalities from one monitor to the other in order to maximise productivity by monitoring all your applications at once (e.g., vehicle control on your primary display and Precision Ag applications on the Extended Monitor).
All the daily tasks an operator needs to manage during his job requires different functions and levers to be operated at the same time. With the new generation of 7R Series Tractors, almost everything can be reconfigured on the CommandARM controls to meet the desires and requirements of the operator and his application.
Instead of SCV 1, you would like to operate the front hitch next to the rear hitch lever – no problem! Entering the control setup enables you to reconfigure all hydraulic functions on the joystick or on the SCV levers.
For even more operator comfort, ISOBUS-driven implements can be operated via the push buttons on the joystick. For the ultimate level of reconfigurability, easily set functions like loader auxiliaries, AutoTrac activation, iTEC™ control sequences, and gear-shifting to the joystick push buttons or SCVs, whereas the SCVs and front and rear hitches can be set to the axles of the joystick. And the best part is you can set up and recall all your settings individually per implement in the Settings Manager.
The Triple-Link Suspension Plus (TLS™ Plus) system increases both transport and field productivity with superior stability, ride, and comfort. The John Deere ActiveSeat™ equipment or the cab suspension allows the operator to increase productivity and decrease the effects of fatigue.
Our TLS integrated self-levelling front suspension puts maximum power to the ground. TLS Plus is a fully integrated, self-levelling front suspension system. It further improves traction by keeping the front wheels in contact with the ground and lets you increase field speeds. TLS Plus is available with a hydraulic differential lock for serious pulling power and wet-disc brakes. TLS Plus allows you to select front axle settings for different uses.
The John Deere ActiveSeat utilises electrohydraulic technology in combination with air suspension, providing the operator with enhanced ride quality over standard air-suspension seats. Operator movements are monitored in order to reduce vertical movement.
An ActiveSeat suspension can isolate the operator from up to 90 percent of vertical movements typically seen in tractor applications.
The cab suspension allows the operator to increase productivity and decrease the effects of fatigue. Regardless of the application, the cab suspension system by John Deere is proactive, permanently active, and cushions the operator in a variety of applications.
The LED option provides 40 percent greater coverage to the side view and 10 percent greater rearview coverage compared to standard halogen lighting.
The LED lighting on John Deere 7R Series Tractors provides high-quality white illumination for easier visibility and contrast. There are 22 LED lights providing 360-degree visibility. The result: night becomes like day, putting less strain on the eyes.
LEDs are virtually indestructible, with a minimum 10,000-hour life expectancy and high resistance to vibration and extreme temperature.
For your convenience, all lighting is easily controlled via the CommandCenter™ display.
Massive power combines with a wide range of easy-to-use hitch and PTO options to give you unprecedented versatility.
An integrated front hitch and PTO make the 7R Series an especially impressive performer in all front-implement applications, with two selective control valves (SCVs), ISOBUS, and double-acting cylinders.
Effortless hitch control
Hitch controls are located in the CommandCenter™ display. Electronic sensors instantaneously relay information to the control module for fast and accurate corrections. Controls can also be accessed on the rear fender extensions.
7R Series Tractors have several PTO options available, such as 540E/1000/1000E PTO, to provide the versatility and flexibility needed to satisfy all implement demands at this power level.
Independent rear SCVs
7R Series Tractors offer four, five, or six rear electrohydraulic SCVs. Each has its own controller, making field installation of extra SCVs easier.
Front hitch and SCVs
The front hitch has a maximum lift capacity at the hitch couplers of 5200 kg (11,464 lb). One or two independent front SCVs are available with adjustable flow rates.
The front and rear hitch are iTEC™ control compatible for total implement management. Electronic sensors relay information to the hitch control module for instantaneous and accurate corrections.
Rear hitch-lift capacity
Designed for strength and versatility, the 3-point hitch has a maximum lift capacity of up to 10.2 tonnes on selected models.
Rear hitch options
7R Series Tractors offer a variety of rear hitch options to complement application needs, including standard lift capacity for lighter implement applications as well as higher lift capacity for heavier implements.
For a robust connection to pulled implements, a drawbar can be equipped on the 7R Series Tractors. An adjustable drawbar with a Category 3 pin (38 mm [1.5 in.]) fulfils the needs of most implements. The optionally available Category 3 heavy-duty drawbar allows a vertical load up to 4500 kg (9921 lb).*
*NOTE: Please check country specific limitations.
AutoTrac hands-free steering adds more comfort; it reliably steers your tractor from day to night and through dust or on hilly terrain.
This prevents costly overlaps or gaps and enables every operator to run at peak performance. With the Generation 4 CommandCenter™ display and a StarFire™ receiver, all you need is a CommandCenter AutoTrac activation and you’re ready to start. Using AutoTrac, you can expect up to 8 percent* input savings and up to 14 percent** productivity increase.
StarFire 6000 Receiver
Exceptional with accuracy, signal stability, and repeatability, the StarFire 6000 Receiver has several options for correction signals:
* From ‘Lohnunternehmen’ 1/2010
** From ‘Landtechnik’ 6/2006
The optional 4600 CommandCenter features a 26,4-cm (10.4-in.) touchscreen, four video inputs, the possibility to connect to the Extended Monitor, and multiple software upgrade options for advanced precision agriculture applications bundled in the CommandCenter Premium or Ultimate Activation.
Gen 4 Ultimate Activation
The Gen 4 Ultimate Activation includes all of the Premium Activation features but adds even more automation capabilities on top. AutoTrac Turn Automation enables fully automated headland turns for picture perfect headlands. AutoTrac Implement Guidance - Passive compensates implement drift in hilly terrain, while In-Field Data Sharing allows wireless exchange of guidance lines and coverage maps between multiple machines operating in one field.
Gen 4 Premium Activation
Upgrade to Section Control to minimise skips and overlaps automatically on the go. By controlling up to 255 individual sections, this saves significant money on fertilizer, chemicals, and seed. Among other advantages, the package also includes Agricultural Industry Electronics Foundation (AEF) certified ISOXML (TC-GEO) documentation capabilities.
John Deere Manure Sensing
Manure is a high-quality but extremely heterogeneous fertiliser. Nutrient levels vary significantly up to factor 25 – even within one tank load. John Deere Manure Sensing enables on-the-go analysis of nutrients in manure and thereby close to the applicator. A near-infrared (NIR) sensor fitted to the slurry tanker measures nitrogen (N), phosphorus (P), potassium (K), ammonium (NH₄), and dry matter with more than 4,000 measurements per second. With a John Deere tractor, the sensor can directly command speed adjustments and automatically control the tankers flow valve to increase or decrease application rates based on your desired nutrient target level while leveraging a prescription map. This enables you to maximise yields and meet legal requirements while cutting costs on mineral fertiliser.
The free MyOperations app takes remote management of your field operations and equipment to the next level. It connects with the John Deere Operations Center, empowering you to view and evaluate daily job execution, machine utilization, and field information anywhere and at any time.
The Operations Center on the MyJohnDeere.com web portal connects you to your machines, operators, and fields in one central location. It provides major hands-on benefits during daily operations and allows you to seamlessly exchange information with your John Deere dealer, your contractor, or other trusted partners. In Operations Center, allocate exact field locations for the next jobs, track the work progress of your machines, easily assign work orders to your operators, view as-applied maps automatically sent from the field, and create, analyse, and share application reports with trusted partners and customers.
Reduce in-field setup time
Connect AutoTrac™ guidance to the John Deere Operations Center and gain additional benefits free of charge. Carefully plan your jobs during the off-season to make sure that everything goes smoothly during peak season. You can easily create, edit, or delete display setup data like clients, farms, fields, boundaries, guidance lines, or machine and implement offsets.
You not only ensure your display setup is always kept up to date and consistent, but you also have peace of mind in having the latest data back-up.
Job management made easy
Eliminate paperwork and endless phone calls during job planning, execution, and reporting. With the MyJobConnect™ application, you can assign clearly defined tasks to your operators on the go, utilising the MyJobsManager app. Your operators can view work orders in real-time and execute accordingly utilising the MyJobs™ app on their mobile device. And once the job is done, you have instantly accurate and complete data at hand for quicker job reporting and professional invoicing.
John Deere dealers have access to several unique cutting-edge remote tools for obtaining great support that helps you optimise machine performance and maximise uptime. 7R Series Tractors come with five years of connectivity from the factory. With this - upon your consent - your John Deere dealer can deliver proactive remote services in order to maximise machine uptime and performance:
Remote Display Access
Remote Display Access allows your dealer specialist to connect with your in-cab display and assist with setup, performance optimisation, or troubleshooting of your machine and even ISOBUS implements. There is no need to wait for an in-field appointment; instead, you benefit from immediate help without incurring any extra travel costs.
Expert Alerts, John Deere’s newest unique system advancement, is based on software algorithms that can predict certain upcoming issues before they have a negative impact or cause collateral damage. With diagnostic and repair information being generated automatically, dealer service technicians can react more quickly and downtime can be reduced significantly.
Machine health monitoring
The machine dashboard displays potential machine error codes to your dealer in real time. That enables the remote service specialist to react quicker than ever before and support you in any problem resolution.
Intelligent ag navigation and fleet logistics
Getting the right equipment at the right time to the right place is key to maximising efficiency and timeliness of multi-machine operations. MyJobConnect Premium extends MyJobConnect to a true mixed-fleet logistics solution. It features fleet overview and turn-by-turn navigation based on a comprehensive field road database including estimated arrival times for vehicles at the predefined destination. For example, setting up navigation to the lead machine enables silage trailers to take the fastest and safest way to the forage harvester and updates the tour of all fleet members as soon as the machine is moving to the next field.