R740iTrailed sprayer
- 4000 l tank volume
- 600l/min filling, 750l/min spraying
- ISOBUS sprayer control
- Individual Nozzle Control for efficient localized application
Precise efficiency
Have you been waiting for a compact, precise, high-efficiency sprayer that excels in all conditions? Then you’ll like the new R700i. Our smallest big sprayer is packed with many advanced features usually found in much larger models – for timely, accurate spraying season after season.
The PowrSpray™ wet system with features like Individual Nozzle Control, Active pause and connection to a Closed Transfer system takes your productivity a step further, while you enjoy superior ease of use.
Features
Expand All
Collapse All
Easy connection to any closed transfer system
Filling circuit
Spraying circuit
Push-button filling, agitation, spraying, or rinsing
Improved solution safety with closed transfer system
Easy connection to any closed transfer system
Fill and rinse the M700(i) and R700i Trailed Sprayers using a closed transfer system. You can plug directly into the container with an adapter that is widely used by crop protection manufacturers.
- Easy connection to any closed transfer system
- Increase safety by avoiding almost any contact with crop protection liquids
Speedy precision with the dual-circuit PowrSpray™ system
Fill faster and spray more accurately with the unique dual-circuit PowrSpray system. It allows you to fill your sprayer in just 7 minutes (measured without priming) and gives you 98 percent* rate control accuracy.
- Save time with fast and efficient filling, spraying, and agitation
- Easy to operate with the convenience of push-button control
The dual-circuit layout maximizes efficiency and ease of use. Each circuit is completely independent, featuring a dedicated centrifugal pump and is optimized for specific functions. Cross contamination between the two circuits is not possible, helping to reduce rinsing requirements and residual liquid disposal.
Filling circuit
Filling circuit
The filling circuit consists of the self-priming centrifugal filling pump (1) which fills the solution tank and provides clean water to the eductor. The filling circuit is not used during spraying and therefore not contaminated with chemicals and does not need to be rinsed.
Active Pause
Active Pause enables the operator to incorporate chemicals and rinse chemical containers with clean water without filling the solution tank.
Spraying circuit
Spraying circuit
The spraying circuit is equipped with a centrifugal spray pump which provides liquid to the spray boom and agitation. Only the spray circuit gets in contact with the chemicals and therefore is the only part of the machine which needs to be rinsed
Direct Rate Control
Spraying pressure and application rate are controlled by adjusting the speed of the centrifugal spray pump via the load sense hydraulic pump drive. This load sense hydraulic drive enables a fast and accurate rate control.
*NOTE: The 98 percent accuracy figure is derived from JDLink™ data based on the John Deere piston diaphragm pump system compared to the John Deere 7.6-cm (3-in.) PowrSpray system and means that the set target rate is applied 98 percent of the time
Intuitive control of sprayer operations with the Solution Command system
Push-button filling, agitation, spraying, or rinsing
Experience push-button filling, agitation, spraying, or rinsing on the R700i Trailed Sprayer. You have all the control you need either from the cab with the joystick or with the Solution Command system from the operator's station.
- Easy to control
- Speeds up the operation
- Accuracy and automation in filling, agitation, spraying, and rinsing
YOU MAY ALSO BE INTERESTED IN...
*98% accuracy coming from JDLink data: 98% of the time the set target rate is applied