Fill and rinse the R700i Trailed Sprayers using a closed transfer system. You can plug directly into the container with an adapter that is widely used by crop protection manufacturers.
Individual nozzle control provides efficient localized crop protection application. Save up to 5 percent in crop protection chemicals – up to 6 EUR per hectare*. The electronically controlled system reaches its ultimate potential together with the pressure recirculation spray functionality.
*NOTE: Based on a 500-ha wheat farm and assumed costs of 53€/ha for herbicides and 65€/ha for fungicides (5 percent x 118€ = 5,90€/ha).
The pressure regulation system of the M700(i) Series Trailed Sprayers combines a high-pressure circuit to ensure a constant pressure (10 bar [145 psi]) for all auxiliary functions and a low-pressure circuit with an electrically controlled spray pressure for accurate spray application.
The centralized operator station on the left-hand side of the sprayer provides superior access to all functions. Clear, allocated symbols reduce the risk of operator mistakes.
For the main functionalities of filling, spraying, agitation. and rinsing, the suction selection valve and pressure selection valve are turned in the same direction.
The M700(i) Series Trailed Sprayers feature a powerful agitation system.
The agitation is supplied by the separate high-pressure circuit to ensure a constant liquid supply of 78 L/min (20.6 gpm) at 10 bar (145 psi). The hydro injectors work with a venturi effect to create a high total agitation output or 408 L/min (107.8 gpm).
|Solution tank nominal volume||3200 L
|Solution tank actual volume (+ 5%)||3360 L
|Rinse water tank volume||400 L
|Tank level indicator||Dry level indication with float
Optional: Digital tank level indication
|Pump||Piston diaphragm pump: 280 L/min
|Solution pump drive||Base: Six-spline power take-off (PTO) driveshaft - 34.9 mm
1 3/8 in.
Optional: Hydraulic pump drive for spray system with single piston diaphragm pump
|Centrifugal self-priming 5.1-cm (2-in.) filling pump capacity|
|Centrifugal 5.1-cm (2-in.) spraying pump capacity|
|Size filling hose connection||51 mm
|Solution system type|
|Valve control||Manual valves|
|Automatic agitation control||Optional: Electric on/off|
|Automatic dilution and rinsing||Optional: AutoDilute stepwise dilution and continuous dilution|
|Double or triple folded|
|Double-folded boom – 2.55-m (8.4-ft) transport width||With four sections: 24/12 m (78.7/39.4 ft)
With five sections: 20/12 m (65.6/39.4 ft)
With six sections: 18/12, 24/12, or 27/14 m
59.1/39.4, 78.7/39.4, or 88.6/45.9 ft
With seven sections: 21/12 or 28/14 m
68.9/39.4 or 91.9/45.9 ft
With eight sections: 24/12 or 28/14 m
78.7/39.4 or 91.9/45.9 ft
With nine sections: 27/14 m
|Triple-folded boom – 3-m (9.8-ft) transport width||With seven sections: 27/18 or 28/20 m
88.6/59.1 or 91.9/65.6 ft
With eight sections: 28/14 m
With nine sections: 27/21 m
With ten sections: 30/21 m
With 11 sections (Germany and Netherlands only): 33/21 m
|Nozzle body||Five-way nozzle holder|
|Spray line system||Base: Standard spray line system (section valves positioned in the middle of the machine)
Optional: Ringline spray line system (section valves positioned in the boom to build up pressure/concentration faster)
Optional: Pressure circulation spray system (no section valves, nozzles opened with air shutoff valves)
|Horizontal sprayboom stabilization system||Base: Center frame with pendulum with shock absorbers
Optional: Boom suspension kit for spraying hilly fields
|Vertical boom suspension system to prevent boom yawing||Base: Center frame with hinge point with shock absorbers and polyurethan dampers
Optional: Independent yaw suspension and damping (push rod system)
|Boom tilt control||Hydraulic boom tilt cylinder|
|Automatic boom leveling||Optional|
|Variable geometry adjustment||Optional|
|John Deere TerrainControl™ Pro|
|John Deere TerrainCommand™ Pro|
|Hydraulic control type||Base: Selective control valve (SCV) boom folding
Optional: Selector boom folding
Optional: Electrohydraulic boom folding
|Machine control||Base: Controller area network (CAN) bus
|Power supply||COBO® connector: 12 V (with standard control)
ISOBUS connector (with optional ISOBUS control)
|Spray rate controller|
|Rate control||Flow-based automatic rate control
Pressure-based automatic rate control
Automatic rate control with pressure-and-flow sensor
|Section control||GNSS section control ready|
|Individual nozzle control||Optional with ISOBUS machines (only with Gen 4 John Deere displays)|
|Linkage to tractor||Lower linkage: Fixed drawbar or track-following drawbar
Upper linkage: Fixed drawbar or track-following drawbar
|Ball coupling type||K-80 or K-80 with RD-40 eye for harbor transport|
|Ring tow eye type||Fixed tow eye (flat, flanged, or offset): 40 mm
Fixed tow eye (flat or flanged): 50 mm
Fixed ring tow eye (flat without TÜV approval): 50 mm
|Wagon hitch type|
|Type||Optional: Steering drawbar|
|Fixed axle without suspension|
|Axle suspension||Double-linked axle suspension
Optional double-linked axle suspension on Select and Premium editions
|Bolt pattern||10 bolts|
|Row-crop tires||270/95R48 Factory choice brand (minimum 144A8/140B)
300/95R46 Factory choice brand (minimum 148A8/144B)
340/85R48 Factory choice brand (minimum 152A8/152B)
|Flotation tires||420/85R38 Factory choice brand (minimum 144A8/141B)
480/70R38 Factory choice brand (minimum 145A8/142B)
520/70R38 Factory choice brand (minimum 150A8/147B)
520/85R38 Factory choice brand (minimum 155A8/152B)
|Speed (depends on local legal requirements)||Base: 25 km/h
Optional: 40 km/h
|Brakes||Base: Parking and emergency brake only
Optional: Single line hydraulic brakes with parking brake
Optional: Dual line air brakes with parking brake
|Fixed axle available track widths||150 to 180 cm
180 to 210 cm
70.9 to 82.7 in.
200 to 225 cm
78.7 to 88.6 in.
|Sliding axle available track widths||150 to 210 cm
59.1 to 82.7 in.
|Fenders||Optional: 400 or 600 mm
15.7 or 23.6 in.
|Chemical inductor hopper||Optional (depending on country requirements)|
|Chemical storage box||Optional: Chemical storage box with lock function|
|Eductor station light|
|Boom working lights||Optional: Halogen or light-emitting diode (LED) field lighting kit|
|Extremity nozzle holder||Left-side mounted and/or right-side mounted (option)
Manual, electric, or pneumatic operated
Both edge nozzle and off-center nozzle functionality
|Off-center nozzle control|
|Closed chemical transfer ready connection||Optional|
|Hydraulic filling connection|
|Hydraulic system oil filter||Optional|
|Self-cleaning pressure filter||Optional|
|Hydraulically driven air compressor|
|Field installation kit for one additional section|
|Nozzle maintenance kit|
|Boom suspension kit for spraying hilly fields|
New Trailed and Self Propelled Sprayers – 0 + 2 Annual Payments (1st Payment January 2018) on 50% RRP.
1 August 2017 - 31 December 2017