9000 Series | SPFH | John Deere UK & IE

Specifications

Specifications

ADD MODEL

Add Model

ADD MODEL

Select Different Model

Specifications

Select up to 4 models to compare specifications

John Deere

Export to Excel

1 2

Key Specs

Maximum power at 1800 rpm	713 kW 970 PS / 956 hp
Engine	Type Liebherr Exhaust emission regulation compliancy: Final Tier 4 / Stage V Displacement 24.2 L 1476.8 cu in. Model D9512 A7 04 Cylinders V 12
Fuel system	Common rail plus four valves
Fuel tank capacity	1,500 L 396.3 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)	103 L 23.8 U.S. gal.
Hand wash tank capacity

Engine power

Maximum power at 1800 rpm	713 kW 970 PS / 956 hp
Maximum power at 1900 rpm
Rated power at 2100 rpm
Fuel tank capacity	1500 L 396.3 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)	103 L 23.8 U.S. gal.

Engine

Manufacturer
Type	Liebherr
Model	D9512 A7 04
Displacement	24.2 L 1476.8 cu in.
Cylinders	V 12
Speed on road
Engine/ground speed management
Fuel system	Common rail plus four valves

Cooling system

Cooling fan drive	Direct

Driveline

Ground drive	Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake system Engine rpm on road: 1200-1800 rpm
Hydraulics	Load sensing
Crop harvesting unit	Harvest channel wide
Crop flow components	Low-friction crop-flow concept
Main clutch	Dry clutch
Number of discs	Two discs
Main driveband	Reinforced with Kevlar inserts
Belt tensioning	Active, hydraulic pressure
Main driveband, polybelt belts	Nine ribs

Header drive

Type	Extra heavy-duty gearbox (i=4.31) Pump/motor displacement: 110cc/90cc

Electrical system/Electrical and hydraulic system

Type/voltage	12 / 24 V
Batteries/battery quantity/capacity	3 x 174 amp-hr
Alternator	14 V - 200 amp 24 V - 140 amp
Hydraulic system capacity	50 L 13.2 U.S. gal.

Ground drive

Type
Differential lock	Manual and automatic
Maximum transport speed	ProDrive transmission: 20 / 25 / 30 / 40 km/h 12.4 / 15.5 / 18.6 / 24.9 mph
Rear axle type	Hydro-mechanical 4WD
Automatic wet brake system	Standard
Engine rpm - Management	Standard

Cab

Tilt and extend steering column	Standard
Air conditioning and heater	Standard - ClimaTrak
Cool box	Optional
Trainee seat	Standard
Hectare counter	Standard
Operator information system	Cornerpost display
CAN-BUS electronics	Standard
Operator's seat	Air-suspension seat optional
Side window wiper	Rear and side window wiper optional Parallel-type windscreen wiper
Electric adjust and heated	Optional on rear view mirrors
Rear view mirrors	Standard
Hand wash tank capacity

Machine management solutions

Yield monitoring	Harvest Monitor™ optional
Documentation	Harvest Doc™ optional
Crop analysis	HarvestLab™ optional
Length-of-cut control based on crop parameter	Infinitely variable length-of-cut (IVLOC™) standard AutoLOC optional - use with HarvestLab
Satellite (GPS) assisted steering	AutoTrac™ optional

Crop-harvesting units

Header height control	Advanced header control (AHC) optional
Grass pick-ups (transport width)	3.0, 4.0, 4.5 m 9.8, 13.1, 14.8 ft
Maize or corn headers
Cereals whole crop header
Additional header types
Number of front-end drive speeds
Driveline
Header connection

Harvest channel

Width

Length of cut

Range	40 knives: 7-25 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps / 1170 rpm 48 knives: 6-21 mm (0.24-0.83 in.) LOC / 1 mm (0.04 in.) steps/ 1170 rpm 56 knives: 4-18 mm (0.16 - 0.71 in.) LOC / 1 mm (0.04 in.) steps / 1170 rpm 56 knives: 4-16 mm (0.16 - 0.63 in.) LOC / 1 mm (0.04 in.) steps / 1350 rpm 64 knives: 3-14 mm (0.12 - 0.55 in.) LOC / 1 mm (0.04 in.) steps / 1350 rpm 64 knives: 3-16 mm (0.12 - 0.763 in.) LOC / 1 mm (0.04 in.) steps / 1170 rpm

Feeding system/Feedrolls

Feed roll frame opening	Swing away, 37-45 degree (angle)
Number	Four
Metal detector	Standard Stone detector is optional
Width, front	830 mm 32.7 in.
Standard feed roll drive	Hydro feedroll drive IVLOC standard Infinitely variable header drive speed standard
Optional feed roll drive

Cutterhead

Type	Dura-Drum™ cutterhead
Cutterhead housing width
Weight
Knife drum width	850 mm 33.5 in.
Knife drum diameter	670 mm 26.4 in.
Speed at rated engine speed	Standard - 1170 rpm Optional - 1350 rpm
Knife types available (crop)	Straight - grass Curved - corn
Number of knives	40 - 48 - 56 - 64
Removal of knives
Shear bar, reversible
Shear bar adjust

Knife sharpening system

Reverse rotation	Yes
Automatic from cab	Yes, remote from cab
Reverse drive	Standard
Reverse speed
Sharpening modes

Kernel processor

Type	John Deere Premium KP, John Deere XStream KP
Quick-change	Quick kernel processor - swing in/swing out
Quick KP removal	Optional crane with remote-controlled electric hoist

John Deere Premium KP

Housing
Lubrication
Roll diameter
Speed differential / Roll speed (lower)
Maize, roll teeth number (speed differential)
Wholecrop, roll teeth number (speed differential)
Sorghum, roll teeth number (speed differential)
Weight
Available KP rolls

John Deere XStream KP

Housing
Lubrication
Roll diameter	250 mm 9.8 in.
Speed differential / Roll speed (lower)
Bearing temperature monitoring system
Maize, roll teeth number (speed differential)	110/145 (50 percent)
Wholecrop, roll teeth number (speed differential)	145/165 (50 percent)
Sorghum, roll teeth number (speed differential)	238 (32 percent)
Weight
Available KP rolls

Serrated roller (kernel processor)

Roll diameter
Roll speed (upper)
Roll speed (lower)
Roll spacing
Maize, roll teeth number (speed differential)
Wholecrop, roll teeth number (speed differential)
Sorghum, roll teeth number (speed differential)
Weight

Disk type (kernel processor)

Number of disks (top/bottom)
Diameter of disks
Weight

Blower/Crop accelerator

Rotor diameter/housing width	560 / 620 mm 22.86 / 24.41 in.
Number of blades	10
Speed (option)	1890 rpm
Accelerator band

Spout

Rotation, degrees	210 degree (angle)
Hydraulic height position	Hydraulic raise and lower standard Automatic spout positioning optional
Double-cap deflection	Standard
Number of wear liners
Reach from center line (Optional)	6 or 8 row: 4.73 m 15.5 ft 10 row: 5.87 m 19.3 ft 12 row: 6.71 m 22 ft

Maintenance

Rotary radiator screen cleaner	Standard
Automatic lubrication system	AutoLube optional
Engine oil and filter change duration	1000 hours

Vehicle

With front tyres	710/70R42
With rear tyres	620/60R30
Transport length (without header)	6.6 m 21.7 ft
Transport width (without header)	3.1-3.7 m 10.2-12.1 ft
Transport height (to cab roof)	3.89 m 12.75 ft
Working height (maximum)	Height to spout: 6.60 m 21.65 ft
Approximate weight (without header)

Additional information

Date collected

Show More Show Less