All Manuals Close Window

Specifications


Engine

3225C

Make Yanmar 3TNV84

Engine Type Diesel

Horsepower 23.8 kW (32 hp)

Cylinders Three

Bore 84 mm (3.31 in.)

Stroke/Cycle Four

Displacement 1.496 L (91.3 cu in.)

Armature Air Gap 0.3 mm (0.012 in.)

Intake/Exhaust Valve Clearance 0.20 mm (0.008 in.)

Lubrication Pressurized

Air Cleaner Dual element, dry-type

3235C/3245C Turbo

Make Yanmar 3TNV84T

Engine Type Diesel

Horsepower 30.2 kW (40.5 hp)

Cylinders Three

Bore 84 mm (3.31 in.)

Stroke/Cycle Four

Displacement 1.496 L (91.3 cu in.)

Armature Air Gap 0.3 mm (0.012 in.)

Intake/Exhaust Valve Clearance 0.20 mm (0.008 in.)

Lubrication Pressurized

Air Cleaner Dual element, dry-type

Fuel System

Fuel Diesel

Fuel Pump Mechanical

Boost Pump Electrical

Electrical System

Alternator 40 amp

Charging System Automotive Type

Battery 500 CCA 12 volts

Capacities

Fuel Tank 72 L (19 gal)

Hydraulic Reservoir 45.4 L (12 gal)

Cooling System 9.5 L (2.5 gal)

3225C Engine Oil (without filter) 5.0 L (5.3 qt)

3225C Engine Oil (with filter) 5.5 L (5.8 qt)

3235C and 3245C Engine Oil (without filter) 5.2 L (5.5 qt)

3235C and 3245C Engine Oil (with filter) 5.7 L (6.0 qt)

Drive Train

Transaxle Hydrostatic

Number of Speeds Infinite (within range)

Travel Speeds

3225C

Mowing* 0-11.2 km/h (0-7 mph)

Forward* 0-17.7 km/h (0-11 mph)

Reverse 0-8.0 km/h (0-5 mph)

3235C/3245C Turbo

Mowing* 0-12 km/h (0-7.5 mph)

Forward* 0-20 km/h (0-12.5 mph)

Reverse 0-8.0 km/h (0-5 mph)

*Top mowing speed and transport speed for each model can be regulated by Mow/Transport Speed Adjustment.

Steering and Brakes

Brakes Type Dual Disc/Hydrostatic

Steering Power Steering

Dimensions

Overall Height 1.38 m (54.5 in.)

Total Height with ROPS 1.95 m (78.2 in.)

Overall Width

Transport Width 2.2 m (86.5 in.)

Mowing Position Width 2.8 m (110 in.)

Overall Length 2.8 m (110 in.)

Tires

Front

3225C and 3235C 26.5 x 14.00-12 turf

3245C 26 x 12 - 12 Multi Trac

Air Pressure 62-83 kPa (09-12 psi)

Rear

Dimensions 20 x 10.00-8 turf

Air Pressure 62-83 kPa (09-12 psi)

Wheel Bolt Torques

Front 135 N•m (100 lb-ft)

Rear 75 N•m (55 lb-ft)

Recommended Lubricants

Engine Oil John Deere PLUS-50™

Engine Coolant Ethylene Glycol Base

Transmission Oil John Deere J20C HY-GARD™ Transmission/Hydraulic Oil

Grease (Cutting Unit and Cutting Unit Attachments) John Deere Special Purpose Golf and Turf Cutting Unit Grease

Grease (Machine and Lift Arms) John Deere Multi-Purpose SD Polyurea Grease

Fast Idle Engine Speed

3225C 3000

3235C 3000

3245C 3000

Speed of Rotation of the Cutting Device

3225C with 2500M Cutting Units 2330 r/min

3225C with ESP Cutting Units 1580 r/min

3235C with 2500M Cutting Units 2330 r/min

3235C with ESP Cutting Units 1590 r/min

3245C with rotary decks 2670 r/min

Sound Measurements

Averaged Sound Level at Work Station According to ISO 79/113/EEC

3225C with 2500M Cutting Units 88 dB(A) at 2910 r/min engine speed

3225C with ESP Cutting Units 88 dB(A) at 2940 r/min engine speed

3235C with 2500M Cutting Units 88 dB(A) at 2930 r/min engine speed

3235C with ESP Cutting Units 87 dB(A) at 2930 r/min engine speed

3245C with rotary decks 90 dB(A) at 2880 r/min engine speed

Vibration Measurements

Hand/Arm Measured Per ISO 5349

3225C with 2500M Cutting Units 0.8 m/s2

3225C with ESP Cutting Units 0.8 m/s2

3235C with 2500M Cutting Units 0.8 m/s2

3235C with ESP Cutting Units 0.8 m/s2

3245C with rotary decks 0.8 m/s2

NOTE: The values listed above represent the maximum weighted root mean square acceleration.

Whole Body Measured Per ISO 2631/1

3225C with 2500M Cutting Units 0.55-0.85 m/s2

3225C with ESP Cutting Units 0.55-0.85 m/s2

3235C with 2500M Cutting Units 0.55-0.85 m/s2

3235C with ESP Cutting Units 0.55-0.85 m/s2

3245C with rotary decks 0.55-0.85 m/s2

NOTE: The value or range listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in ISO 2631/1.