All Manuals Close Window

Specifications


Specifcations

Engine

Engine Model Number Yanmar 4TNV84T

Engine Type 4-Cycle, 4-Cylinder, In-Line Turbocharged Diesel

Bore 84 mm (3.307 in.)

Stroke 90 mm (3.543 in.)

Displacement 1.995 L (121.74 cu in.)

Armature Air Gap 0.3 mm (0.012 in.)

Intake and Exhaust Valve Clearance (cold) 0.13 (0.005

Cooling Liquid Cooled

Power Output 41.2 KW (56 hp)

Injection Type Direct

Air Cleaner Dry, Replaceable Dual Element

Capacities

Engine Oil (with Filter) 7.4 L (7.8 qt)

Fuel Tank 83 L (22 gal)

Coolant 7.5 L (8 qt)

Hydraulic System 58.7 L (15.5 gal)

Hydrostatic Transmission 13.3 L (3.5 gal)

Rear Axle 4.7 L (5 qt)

Travel Speeds

High Range

Forward 0 - 23.3 km/h (0 - 14.4 mph)

Reverse 0 - 11.6 km/h (0 - 7.2 mph)

Low Range

Forward 0 - 13.7 km/h (0 - 8.6 mph)

Reverse 0 - 7.2 km/h (0 - 4.3 mph)

Tire Dimensions

Front Drive Tires 26x12.00-12

Rear Tires 18x9.50-8

Mower Deck Caster Tires 11x4-5

Tire Inflation Pressures

Machine Front Tires 207 kPa (30 psi)

Machine Rear Tires 193 kPa (28 psi)

Mower Deck Caster Tires 275 kPa (40 psi)

Dimensions

Height 2 m (78 in.)

Width (Mower Decks Raised) 2.2 m (84.5 in.)

Width (Mower Decks Lowered) 3.3 m (131 in.)

Length (With Mower Deck) 3.4 m (133 in.)

Length (Without Mower Deck) 2.6 m (101 in.)

Wheelbase 1.6 m (61 in.)

Weight (With Mower Decks) 1814 kg (4000 lb)

Ground Clearance 18 cm (7 in.)

Cutting Width 3.3 m (131 in.)

Mower Decks

Front Mower Deck

Cutting Width 1.6 m (62 in.)

Cutting Height 2.5 - 15.2 cm (1 - 6 in.)

Number of Blades 3

Side Mower Decks

Cutting Width 1 m (40 in.)

Cutting Height 2.5 - 14 cm (1 - 5.5 in.)

Number of Blades 2

Tightening Torques

Front Wheels 136 - 163 N•m (100 - 120 lb-ft)

Rear Wheels 81 - 95 N•m (60 - 70 lb-ft)

Blade Mounting Cap screws 122 N•m (90 lb-ft)

Recommended Lubricants

Engine Oil JD TORQ-GARD SUPREME™, JD PLUS-4™, OR JD PLUS-50™15W-40 or SAE15W-40

Hydraulic Oil John Deere Low Viscosity HY-GARD™ transmission/hydraulic fluid

Transmission Oil John Deere Low Viscosity HY-GARD™ transmission/hydraulic fluid

Grease: (This may change for high-speed applications such as cutting units)

John Deere Multi-Purpose SD Polyurea Grease

John Deere Multi-Purpose HD Lithium Complex Grease

(Specifications and design subject to change without notice.)

Sound Measurements

Averaged Sound Level at Work Station According to ISO 11201:1995

1600 Turbo with mower decks 93 dB(A) at 3100 r/min engine speed

Measured Sound Power Level

1600 Turbo with mower decks 107 dB(A) at 3100 r/min engine speed

Vibration Measurements

Hand/Arm Measured Per ISO 5349

1600 Turbo 1.7 m/s

NOTE: The value listed above represents the maximum weighted root mean square acceleration.

Whole Body Measured Per ISO 2631/1

1600 Turbo 0.9-1.6 m/s2

NOTE: The value or range listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in ISO 2631/1.