All Manuals Close Window

Specifications


Engine (Gas Model)

NOTE: The installed engines do comply with the European environmental engine emission directives 2002/88/EC and 97/68/EC based on the certificates received by the engine supplier.

Manufacturer Kawasaki

Model Number FD620D

Type ( Liquid-Cooled Gas

Displacement 617.8 cc (37.7 cu in.

Cylinders 2

Bore 79 mm (3.11 in)

Stroke 68 mm (2.68 in)

Intake Valve Clearance 0.25 mm (0.010 in.)

Exhaust Valve Clearance 0.25 mm (0.010 in.)

Compression Ratio (9.0:1

Fast Idle RPM 3400

Slow Idle RPM 1550

Valving OHV

Oil Filter Full Flow, Replaceable

Lubrication Full Pressure

Cooling Liquid

Air Cleaner Foam Precleaner with Paper Element

Engine (Diesel Model)

NOTE: The installed engines do comply with the European environmental engine emission directive 97/68/EC based on the certificates received by the engine supplier.

Manufacturer Yanmar

Model Number 3TNE68

Type (Diesel

Displacement 783.3 cc ( 47.8 cu in.

Cylinders 3

Bore 68 mm (2.68 in)

Stroke 72 mm (2.83 in)

Intake Valve Clearance 0.02 mm (0.008 in.)

Exhaust Valve Clearance 0.02 mm (0.008 in.)

Compression Ratio (23:1

Fast Idle RPM 3225

Slow Idle RPM 1450

Valving OHV

Oil Filter Full Flow, Replaceable

Lubrication Full Pressure

Cooling Liquid

Air Cleaner Primary and Secondary Filters

Fuel System (Gas Model)

Fuel Type Regular Unleaded

Fuel Filter Replaceable Element

Fuel System (Diesel Model)

Fuel Type Diesel Fuel

Fuel Filter Replaceable Element

Engine Electrical System

Alternator Capacity–Gas (16 amp)

Alternator Capacity–Diesel (20 amp)

Battery Type 12 Volt

Battery Reserve Capacity @ 25 Amps 68 minutes

Cold Cranking Amps @ 0?F (500)

Traction Drive

Type Hydraulic Wheel Motors

Wheel Motors Ross

Drive Wheels Front

Traction Drive Hydrostatic, 2 Pedal Control

Travel Speed - Forward 0-12.9 km/h (0-8.0 mph)

Travel Speed - Reverse 0-4.8 km/h (0-3.0 mph)

Travel Speed - Mowing 0-7.1 km/h (0-4.4 mph)

Brakes

Dynamic Braking Hydrostatic–Dual Pedal

Park Brake Dual Disc Type

Reel Drive (2500E)

Reel Drive 48 Volt Electric Motor (One Each Reel)

Power Source 48 Volt Alternator @ 90 Amps (Belt Driven)

Speed Control Operator Adjustable Electronic Power Controller with On-Board Diagnostics (One Each Reel)

Reel Drive (2500A)

Reel Drive Hydraulic

Pump Gear

Filtration 10 Micron

Mower

Size 55.9 cm (22 in.)

Clip Frequency @ 6.4 km/h (4.0 mph) 4.44 mm (.175 in.)

Reel Diameter 12.7 cm (5 in.)

Height-Of-Cut 2.4–22 mm (3/32–7/8 in.)

Number of Blades 7 or 11

Tires

Style

Location

Size

Load Rating

Smooth

Front/Rear

18x10.50-10

2 Ply

Smooth

Front/Rear

20x10.00-10

2 Ply

Soft Trac

Front/Rear

20x10.00-10

4 Ply


Dimensions

Width without Reels 1.29m (51 in.)

Width with Reels 1.69m (66.7 in.)

Width with Grass Catchers 1.84m (72.75 in.)

Mowing Width .1.57m (62 in.)

Transport Width 1.69m (66.7 in.)

Length 2.27m (89.5 in.)

Length with Grass Catchers 2.63m (103.5 in.)

Overall Height 1.94m (76.5 in.)

Ground Clearance without Reels (Minimum) 15.2 cm (6 in.)

Ground Clearance with Reels (Minimum) 76 mm (3 in.)

Wheelbase - Front to Rear (Length) 1.29m (51 in.)

Wheelbase - Front Tire (Width) 1.01m (40 in.)

Weight - Includes Cutting Units, All Fluids and 18x10.50-10 Tires

Weight–Gas Unit 576 kg (1270 lbs)

Weight–Diesel Unit 626 kg (1380 lbs)

Fluid Capacities

Fuel Tank 32.2 L (8.5 gal)

Cooling System 3.5 L (3.7 qt)

Crankcase with Filter-Gas Unit 2.1 L (2.2 qt)

Crankcase with Filter-Diesel Unit 2.2 L (2.3 qt)

Hydrostatic and Reel Drive System 28.8 L (7.6 gal)

Hydraulic Reservoir Capacity 20.4 L (5.4 gal)

Recommended Lubricants

Engine Oil–Gas Unit John Deere TURF-GARD®

Engine Oil–Diesel Unit John Deere PLUS-50®

Engine Coolant Ethylene Glycol Base

Transmission Oil John Deere HY-GARD®

Grease John Deere SPECIAL PURPOSE HD WATER RESISTANT GREASE John Deere MULTI-PURPOSE HD LITHIUM COMPLEX GREASE John Deere SPECIAL PURPOSE HD CORNHEAD GREASE John Deere SPECIAL PURPOSE COTTON PICKER SPINDLE GREASE

Sound Measurements

Averaged Sound Level at Work Station According to ISO11201:1995

2500A Gas Model 89 dB(A) at 3325 r/min engine speed

2500A Diesel Model 89 dB(A) at 3250 r/min engine speed

2500E Gas Model 84 dB(A) at 3300 r/min engine speed

2500E Diesel Model 85 dB(A) at 3190 r/min engine speed

Vibration Measurements

Hand/Arm Measured Per ISO5349

2500A Gas Model with reels 1.66 m/s2 at 3325 r/min engine speed

2500A Diesel Model with reels 1.15 m/s2 at 3250 r/min engine speed

2500E Gas Model with reels 1.66 m/s2 at 3325 r/min engine speed

2500E Diesel Model with reels 1.15 m/s2 at 3250 r/min engine speed

NOTE: The value listed above represents the maximum weighted root mean square acceleration.

Whole Body Measured Per ISO 2631/1

 2500A Gas Model with reels 0.8 to 1.7 m/s2

2500A Diesel Model with reels 0.6 to 1.2 m/s2

 2500E Gas Model with reels 0.8 to 1.7 m/s2

2500E Diesel Model with reels 0.6 to 1.2 m/s2

NOTE: The range listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in ISO 2631/1.