Pictorial Safety Signs
At several important places on this machine safety signs are affixed intended to signify potential danger. The hazard is identified by a pictorial in a warning triangle. An adjacent pictorial provides information how to avoid personal injury. These safety signs, their placement on the machine and a brief explanatory text are shown in this Safety section.
Avoid Injury from Tipping
Do not drive where tractor could slip or tip. Do not drive on a slope with more then a 16? incline.
Engage park brake by pulling towards operator. Disengage by pushing lever away from operator.
Weight Transfer Valve
Transfer some of the mowers weight to the drive wheels.
Push lever forward to operate engine at FAST idle.
Pull lever rearward to operate at SLOW idle.
Warning Hot Surface
Picture Note: Decal location: One on each side just under the fuel tank, and one on left side of bumper.
Keep fingers and hands away from hot surfaces. DO NOT splash fuel on or near hot surfaces.
Avoid Bodily Injury
Picture Note: Located on backlap valve body.
Stop pump and power sources before approaching valve controlled equipment. The unload position of this valve does not fully shut off flow to controlled equipment.
Avoid Injury from Battery Gases and Acids
Picture Note: On battery cover
Batteries contain explosive gases and sulfuric acid. Use extreme caution when handling battery.
Tow Valve Label
Picture Note: On right underside of side cover.
Read Using Free Wheeling Lever in OPERATING section of your operators manual before operating free wheeling lever.
Warning Rotating Blades
Picture Note: Two decals used, one on each end of cutting units.
Avoid injury from rotating blades. Keep hands and feet away while machine is running.
CE Certification, Specification and Sound Label
Picture Note: Below the serial number plate on front pedestal.
This label on your professional utility mower indicates that this model has been certified and is in compliance with European Directive 89/392/EEC Standards.
CE Specifications Label
• A - 26 In. Cutting Unit CE Specification Label
• B - 30 In. Cutting Unit CE Specification Label