All Manuals Close Window

Specifications


Engine Specifications

Make Yanmar 3TNE68A

Engine Model Number 3008D002

Horsepower 13.4 kW (18.0 hp)

Cylinders 3

Displacement 0.784 L (47.8 cu in.)

Bore 68 mm (2.68 in.)

Stroke 72 mm (2.83 in.)

Valve Clearance 0.20 mm (0.008 in.)

Lubrication Pressurized

Oil Filter Full Flow Filter

Air Cleaner 4 in. Radial seal, dual stage, restriction indicator

Cooling Liquid

Fuel System

Fuel Diesel

Electrical System

Type 12 Volt ignition glow plug via rocker switch

Battery Size 480 Cold Cranking Amps @ -18?C (0?F)

Fluid Capacities

Fuel Tank 28.0 L (7.4 gal)

Hydraulic Reservoir) 20.8 L (5.5 qt)

Cooling system 4.0 L (4.2 qt)

Engine Oil (with filter) 3.0L (3.1 qt)

Wheel Motor and Reel Drive

Drive Wheels Front, with standard third (rear) wheel drive

Traction Drive Hydrostatic, 2-pedal

Pump Gear

Reel Control Valves Electro-hydraulic

Filtration 10 microns & 100 mesh strainer

Cutting Unit Lift Hydraulic cylinder for front two units and hydraulic cylinder for center unit

Travel Speeds

Mowing 0-8.1 km/h (0 - 5 mph)

Transport 0 - 12.8 km/h (0 - 8 mph)

Reverse 0 - 8.1 km/h (0 - 5 mph)

Cutting Units

Number 3

Size 66 cm or 76.2 cm or (26 in.) (30 in.)

Backlapping Standard on machine, variable speed adjustment

Clip frequency: 5 blade units 0.323/km/h (0.201/mph)

Clip frequency: 8 blade units 0.203/km/h (0.126/mph)

Reel Diameter 17.8 cm (7 in.)

Bed Knife Adjustment 0.05 mm (0.002 in.)

Number of Blades 5 or 8

Steering and Brakes

Brake Type Dual 20.3 cm (8-inch) disk

Steering Hydraulic Power

Dimensions

Wheelbase 140 cm (55 in.)

Tread Width 132 cm (52 in.)

Mowing position width with 26-inch reels 183 cm (72 in.)

Mowing position width with 30-inch reels 213 cm (84 in.)

Turning radius uncut circle with 26-inch reels 50.8 cm (20 in.)

Turning radius uncut circle with 30-inch reels 40.6 cm (16 in.)

Weight (full fluids, no operator with cutting units) 789 kPa (1740 lb)

Tires

Front - 20x10-10 151.7 kPa (22 psi maximum)

Rear - 20x10-8 82.7 kPa (12 psi maximum)

Recommended Lubricants

Engine Oil John Deere PLUS-50®

Engine Coolant Ethylene Glycol Base

Transmission Oil John Deere HY-GARD®

Grease John Deere Special Purpose HD Water Resistant Grease

John Deere Multipurpose HD Lithium Complex Grease

John Deere Special Purpose HD Cornhead Grease

John Deere Special Purpose Cotton Picker Spindle Grease

(Specifications and design subject to change without notice.)

Sound Measurement

Average Sound Level

2653A Greens Mower 88 LPA at 3400 r/min engine speed

Sound pressure per 79/113/EEC. Sound power per four hemisphere method.

Vibration Measurements

Hand/Arm Measured Per ISO 5349

2653A Greens Mower 1.5 m/s2 at 3400 r/min engine speed

Whole Body

The weighted root mean square acceleration to which the whole body is subjected ranges from 0.9 to 1.4 m/s2 (Diesel Model) measured on a representative machine during actual mowing and transport conditions. The acceleration value depend upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits.

Measurements were obtained through actual field data according to Standard Procedure in
ISO 2631/1.