All Manuals Close Window

Specifications


Engine

X540

Make iTorque™ Power System - Kawasaki

Model Number FD731V

Cylinders V-Twin

Cycle Four

Cooling Liquid Cooled

Spark Plug Gap 0.75 mm (0.030 in.)

Spark Plug Torque 25 N•m (18 lb-ft)

Drivetrain

Transaxle Kanzaki, Variable Speed Hydrostatic

Model X540 K72A

Fuel System

Fuel Types (Recommended):

Regular Grade 87 Octane Unleaded Fuel

Ethanol Blended Fuel (Up to 10%)

MTBE Reformulated Fuel (Up to 15%)

Fuel Filter Replaceable - paper element

Fuel Pump Pulse

Fuel Delivery Carburetor

Electrical System

Battery Type 12 Volt

Cold Cranking Capacity 500 Amps

Tires

Front 16x6.50-8 (Turf)

Rear 24x12.00-12 (HDAP)

Rear 24x12.00-12 (Turf)

Inflation - Front 97 kPa (14 psi)

Inflation - Rear 69 kPa (10 psi)

Capacities

Crankcase with oil filter 2.3 L (2.4 qt)

Transaxle 5.3 L (5.6 qt)

Fuel 18.9 L (5.0 gal)

Cooling System with Recover Tank 3.0 L (3.2 qt)

Travel Speeds at Full Engine RPM

Forward 0-11.3 km/h (0-7.0 mph)

Reverse 0-6.4 km/h (0-4.0 mph)

Dimensions

X540

Height 122 cm (48 in.)

Overall Width (without mower deck) 104 cm (41 in.)

Length 201 cm (79 in.)

Weight (Tractor only - full of fuel) 327 kg (721 lb)

48 Edge™ Xtra Mower

Cutting Width 1.22 m (48 in.)

Blades-Rotary .3

Blade Bolt Torque 68 N•m (50 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

54 Edge™ Xtra Mower

Cutting Width 1.37 m (54 in.)

Blades-Rotary .3

Blade Bolt Torque 68 N•m (50 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

Recommended Lubricants

Engine Oil TURF-GARD® OR PLUS-4®

Grease:

John Deere MOLY HIGH TEMPERATURE EP GREASE

John Deere Multi-Purpose SD Polyurea Grease

John Deere Multi-Purpose HD Lithium Complex Grease

(Specifications and design subject to change without notice.)

Sound Measurements

Averaged Sound Level at Work Station According to EN836-A2

X540 without mower deck 85.0 dB(A) at 3450 r/min engine speed

X540 with 48C Inch Mower Deck 90.5 dB(A) at 3450 r/min engine speed

X540 with 54C Inch Mower Deck 90.3 dB(A) at 3450 r/min engine speed

Vibration Measurements

Hand/Arm Measured Per EN836-A2

X540 without mower deck 1.1 m/s2 at 3450 r/min engine speed

X540 with 48C mower deck 1.4 m/s2 at 3450 r/min engine speed

X540 with 54C mower deck 1.3 m/s2 at 3450 r/min engine speed

Whole Body Measured Per EN836-A2

X540 without mower deck 1.4 m/s2

X540 with 48C mower deck 0.6 m/s2

X540 with 54C mower deck 1.2 m/s2

NOTE: The value listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in EN836-A2.