All Manuals Close Window

Specifications


Model X110

Engine Model Briggs & Stratton 31

Displacement 502 cc (30.6 cu in.)

Bore 90.68 mm (3.57 in.)

Stroke 77.72 mm (3.06 in.)

Ignition Module (Armature) Air Gap 0.253 - 0.356 mm (0.010 - 0.014 in.)

Intake Valve Clearance 0.076 - 0.127 mm (0.003 - 0.005 in.)

Exhaust Valve Clearance 0.13 - 0.18 mm (0.005 - 0.007 in.)

Spark Plug-Gap 0.76 mm (0.030 in.)

Spark Plug-Torque 20 N•m (15 lb-ft)

Cylinders Single

Oil Filter No

Air Filter Paper with Foam

Transmission Hydrostatic

Transaxle Model Tuff Torq™ T40

Travel Speed - Forward 0 - 8.9 km/h (0 - 5.5 mph)

Travel Speed - Reverse 0 - 5.2 km/h (0 - 3.2 mph)

Model X120

Engine Model Briggs & Stratton 31

Displacement 502 cc (30.6 cu in.)

Bore 90.60 mm (3.56 in.)

Stroke 77.78 mm (3.06 in.)

Ignition Module (Armature) Air Gap 0.253 - 0.356 mm (0.010 - 0.014 in.)

Intake Valve Clearance 0.076 - 0.127 mm (0.003 - 0.005 in.)

Exhaust Valve Clearance 0.13 - 0.18 mm (0.005 - 0.007 in.)

Spark Plug-Gap 0.76 mm (0.030 in.)

Spark Plug-Torque 20 N•m (15 lb-ft)

Cylinders Single

Oil Filter Yes

Air Filter Paper with Foam

Transmission Hydrostatic

Transaxle Model Tuff Torq™ T40

Travel Speed - Forward 0 - 8.9 km/h (0 - 5.5 mph)

Travel Speed - Reverse 0 - 5.2 km/h (0 - 3.2 mph)

Model X140

Engine Model Briggs & Stratton 44

Displacement 725 cc (44.2 cu in.)

Bore 75.44 mm (2.97 in.)

Stroke 73.41 mm (2.89 in.)

Ignition Module (Armature) Air Gap 0.203 - 0.305 mm (0.008 - 0.012 in.)

Intake and Exhaust Valve Clearance 0.102 - 0.152 mm (0.004 - 0.006 in.)

Spark Plug-Gap 0.76 mm (0.030 in.)

Spark Plug-Torque 20 N•m (15 lb-ft)

Cylinders Twin

Oil Filter Yes

Air Filter Paper with Foam

Transmission Hydrostatic

Transaxle Model Tuff Torq™ HD K46

Travel Speed - Forward 0 - 8.9 km/h (0 - 5.5 mph)

Travel Speed - Reverse 0 - 5.2 km/h (0 - 3.2 mph)

Electrical System (All Models)

Charging System Regulated Circuit

Charging System Capacity 9 Amp

Battery Voltage 12 Volts

Battery Type BCI Group U1

Capacities

Models X110, X120

Crankcase, with Oil Filter 1.4 L (1.5 qt)

Models X140

Crankcase, with Oil Filter 1.9 L (2.0 qt)

Fuel System (All Models)

Fuel Types (Recommended):

Regular Grade 87 Octane Unleaded Fuel
Ethanol Blended Fuel (Up to 10%)
MTBE Reformulated Fuel (Up to 15%)

Recommended Lubricants (All Models)

Engine Oil:

TURF-GARD™
PLUS 4™

Grease:

John Deere Multi-Purpose SD Polyurea Grease
John Deere Multi-Purpose HD Lithium Complex Grease

(Specifications and design subject to change without notice)

Dimensions (All Models)

Height (X110) 108 cm (42.5 in.)

Height (X120) 113 cm (44.5 in.)

Height (X140) 114 cm (45.0 in.)

Length (Overall) (X110, X120) 175 cm (68.75 in.)

Length (Overall) (X140) 176 cm (69.25 in.)

Width (Mower Deck Chute Down) (X110, X120) 131 cm (51.75 in.)

Width (Mower Deck Chute Down) (X140) 152 cm (60 in.)

Weight (X110, X120) 204 kg (450 lb)

Weight (X140) 238 kg (524 lb)

Tires

Models X110, X120

Size (Front) 15 x 6.00 - 6

Size (Rear) 20 x 8.0 - 8

Tire Pressure (Front) 97 kPa (14 psi)

Tire Pressure (Rear 69 kPa (10 psi)

Model X140

Size (Front) 16 x 6.5 - 8

Size (Rear) 22 x 9.5 - 12

Tire Pressure (Front) 83 kPa (12 psi)

Tire Pressure (Rear) 83 kPa (12 psi)

(Tire pressure information is also located on the sidewalls of the tires)

Mower Deck - 107 cm (42 in.)

Blades Rotary 2

Blade Nut Torque (w/ M12 Nut) 75 N•m (55 lb-ft)

Blade Nut Torque (w/ 5/8 in. Nut) 88 N•m (65 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

Cutting Width 1067 mm (42 in.)

Mower Deck - 122 cm (48 in.)

Blades Rotary 3

Blade Nut Torque (w/ M12 Nut) 75 N•m (55 lb-ft)

Blade Nut Torque (w/ 5/8 in. Nut) 88 N•m (65 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

Cutting Width 1219 mm (48 in.)

Fast Idle Engine Speed

X110 Without Mower Deck 3050

X120 Without Mower Deck 3200

X140 Without Mower Deck 3350

Speed of Rotation of Cutting Device

X110 with 42 2728 r/min at 3150 r/min engine speed

X120 with 42 2858 r/min at 3300 r/min engine speed

X140 with 48 3830 r/min at 3450 r/min engine speed

Sound Measurements

Averaged Sound Level at Work Station According to EN836-A2

X110 with mower deck disengaged 83.5 dB(A) at 3150 r/min engine speed

X110 with 107 cm (42 Inch) Mower Deck engaged 86.7 dB(A) at 3150 r/min engine speed

X120 with mower deck disengaged .84.1 dB(A) at 3300 r/min engine speed

X120 with 107 cm (42 Inch) Mower Deck engaged 87.4 dB(A) at 3300 r/min engine speed

X140 with mower deck disengaged .82.8 dB(A) at 3450 r/min engine speed

X140 with 122 cm (48 Inch) Mower Deck engaged 92.0 dB(A) at 3450 r/min engine speed

Vibration Measurements

Hand/Arm Measured Per EN836-A2

X110 with 107 cm (42 Inch) Mower Deck 3.4 m/s2 at 3150 r/min engine speed

X120 with 107 cm (42 Inch) Mower Deck 3.3 m/s2 at 3300 r/min engine speed

X140 with 122 cm (48 Inch) Mower Deck 2.2 m/s2 at 3450 r/min engine speed

Whole Body Measured Per EN836-A2

X110 with 107 cm (42 Inch) Mower Deck 1.5 m/s2

X120 with 107 cm (42 Inch) Mower Deck 1.5 m/s2

X140 with 122 cm (48 Inch) Mower Deck 1.6 m/s2

NOTE: The value listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in EN836-A2.