Specifications

EU Gas Engine Emission Compliance

NOTE: The installed engines do comply with the European environmental engine emission directives 2002/88/EC and 97/68/EC based on the certificates received by the engine supplier.

Engine

Manufacturer Kawasaki

Model Series FJ180V

Cycle 4

Valve Type Over Head Valve (OHV)

Displacement 179 cc (10.9 cu in.)

Choke Manual

Air Cleaner Paper Element with Foam Pre-Cleaner

Spark Plug RN11YC or NGK-BP5ES

Spark Plug Gap 0.76 mm (0.030 in.)

Spark Plug Torque 20 N•m (15 lb-ft)

Starter Recoil

Capacities

Fuel Tank 2.0 L (2.1 qt)

Engine Oil 0.6 L (20 oz)

Rear Grass Bag 74 L (2.5 bu)

Drive System

Manufacturer Kanzaki

Type Gear Transmission

Number of Speeds 5

Travel Speeds:

First Gear 1.9 km/h (1.2 mph)

Second Gear 2.9 km/h (1.8 mph)

Third Gear 3.9 km/h (2.4 mph)

Fourth Gear 4.8 km/h (3.0 mph)

Fifth Gear 6.6 km/h (4.1 mph)

Machine Specifications

Deck Material Cast Aluminum

Adjustable Handle Standard

Rear Grass Bag Standard

Side Discharge Chute Optional

Mulching Plug Optional

Cutting Height Range 25 - 102 mm (1 - 4 in.)

Cutting Width 53.3 cm (21 in.)

Blade Hardware Torque 75 N•m (55 lb-ft)

Wheel Size 8.75 x 2.25

Weight (Approximately) 50 kg (110 lb)

Recommended Lubricants

Fuel See Filling Fuel Tank in the Service section

Engine OIl TORQ-GARD SUPREME® (SAE 30 or SAE 10W-30)

Grease John Deere MOLY HIGH TEMPERATURE EP GREASE

John Deere HIGH TEMPERATURE EP GREASE

John Deere GREASE GARD™

(Specifications and design subject to change without notice)

Fast Idle Engine Speed

JX75 Walk-Behind Rotary Mower 3200

Speed of Rotation of Cutting Device

JX75 Walk-Behind Rotary Mower 3300 r/min

Sound Measurements

Averaged Sound Level at Work Station According to EN836-A2

JX75 Walk-Behind Rotary Mower 87.2 dB(A) at 3300 r/min engine speed

Vibration Measurements

Hand/Arm Measured Per EN836-A2

JX75 Walk-Behind Rotary Mower 7.3 m/s2 at 3300 r/min engine speed