ZTrak Mowers are designed around a heavy-duty formed and welded steel frame for strength and reliability.
Large front caster wheels and large rear drive wheels provide several operator benefits:
The operator platform is roomy and uncluttered for maximum comfort, and the controls are convenient to use:
A 16.1 kW at 3350 rpm, V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
A no-tools oil drain valve provides easy access for oil changes.
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
The operator station is designed for operator comfort and convenience in operating all controls:
Comfortable seats with two suspension springs and no-tools, fore-aft adjustment, that can be used by the operator while seated:
Two steel springs under the seat absorb shocks when traveling over rougher areas, to provide a smoother ride.
Cup holder and storage compartment add convenience for the operator.
The commercial-style steel footrest flips up to provide easy access for servicing the mower deck:
The motion-control levers can be adjusted to three different height settings and fifteen different fore-aft settings:
A standard shock absorber for the motion-control levers makes maneuvering ZTrak™ Mowers easy and comfortable:
Making the tracking adjustment from the operator seat is quick and easy. The cut-height pin doubles as a convenient tool for adjusting the motion-control levers:
The operator control panel is conveniently located and easy to use.
The following instruments and controls are included:
The park brake is conveniently located:
The Z540R includes a foot-lift pedal along with the hand-lift lever to make raising the mower deck easier. The foot-lift pedal also provides a convenient way to temporarily raise the mower deck over an obstruction while mowing:
The footrest area is hinged and easily raised for service to mower deck:
The engines are easy to service, including changing the oil and the oil filter and servicing the air filter.
Accel Deep mower decks have several features that make them easy to service:
Spring-loaded, flip-up belt guards make removing debris easy.
All mower decks have provision for a standard, 9.5-mm (3/8-in.) ratchet wrench to be used for releasing belt tension when removing the drive belt.
The Power Flow blower used on 122-cm (48-in.) mower decks is mounted on a sturdy swing arm that allows easy installation and cleanout.
Tie-down locations are provided for convenience and safety when trailering the machine.
The 122-cm (48-in.) High-Capacity Mower Deck has a deep-deck design to handle higher volumes of grass. It is stamped from heavy-gauge steel and has additional durability features to stand up to challenging mowing conditions.
The 122-cm (48-in.) High-Capacity Deck is stamped from heavy, 3.8-mm (0.150-in.) 9-gauge steel to minimize the number of welds and provide a smooth underside for reduced material buildup:
A wash port is provided to make cleaning the underside of the mower deck easy:
An optional mulching attachment is available:
An optional rear bagger is available:
The Power Flow blower is mounted on a sturdy swing arm that allows easy installation and cleanout.
*Recommended Retail Price. Prices are inclusive of VAT
All prices are valid until the 1st of October 2019