618PFCombine Header
- 5,50 m cutting width
- length of belts: 550 mm, number of belts 4
- 1000 mm Table length
- 660 mm Ø Auger
- 2 Automatic Height Control sensors
Versatile small grain header
In tough conditions like down crops, peas or grass seed the 700PF header with active feed active transport of the crop into the feed auger prevents the accumulation of material at the front of the header.
The 1000mm distance between the cutter bar and feeding auger further reduces losses in rapeseed as the reel can be set higher to minimize shattering losses.
Crop Conversion is simple and easy, just click on the side knives, lift the auger and you are ready to harvest.
Features
Expand All
Collapse All
Easy Cut II cutterbar
Protection slat for cutterbar
Driveline layout
Large, high-capacity auger
Conventional auger
Single-lever multicoupler
Control with the lateral-tilt feederhouse
Rigid cutterbar results in efficient feeding
Easy Cut II cutterbar
The 600PremiumFlow Header is equipped with the Schumacher Easy Cut II cutting system. This features:
- Non-clog dual knife guards that fully enclose the sections for positive, clean cutting. High-strength construction provides reliability even when using crop lifters.
- Double-cut sections alternately cut on the upper and lower edges, providing a self-cleaning effect.
- 89-mm (3-in.) sections are bolted, allowing easy replacement in the field.
Protection slat for cutterbar
Protection slat for cutterbar
The protection slat for the cutterbar protects from injury and keeps safety at the highest levels.
Heavy-duty driveline designed for biggest throughput and best efficiency
Driveline layout
Driveline layout
The heavy-duty driveline is located on the left-hand side for all cutting widths. The knife is belt driven while the conveyor augers and the auger is chain driven.
The auger drive is protected by a slip clutch to protect both auger and drive system from overload in case of crop plugging or stone collection.
Large, high-capacity auger provides greater crop material handling
Large, high-capacity auger
Large, high-capacity auger
All 600PremiumFlow Series Cutting Platforms feature a large, 660-mm (26-in.) auger with deep auger flights to handle large amounts of crop. This design provides a very big area under the auger to aggressively feed large volumes of crop material.
The auger is equipped with retractable auger fingers over the full width of the auger. Auger fingers are designed for quick replacement and mounted with a finger retainer. Auger finger retainers prevent broken fingers from being moved into the combine, minimizing the potential damage caused by rocks and other obstructions.
Conventional auger
Single-point hydraulic and electrical hookup saves time
Single-lever multicoupler
Single-lever multicoupler
A simple, convenient single-lever multicoupler on the left-hand side of the feederhouse allows the operator to connect all hydraulic and electrical header functions, and engages the latch pins in one easy step. The single-lever multicoupler saves time when moving from field to road and vice versa.
Automatic header control (AHC)
Control with the lateral-tilt feederhouse
The 600PremiumFlow Series headers provide a fully-integrated header control system. The system is based on the 600R AHC systems, only the sensors are different.
While the 600R Series Headers use small sensor stripes, the 600PremiumFlow Series is based on heavy-duty sensor plates. These are spring loaded and heavy duty and do not float on the stubble as many competitive sensor plates tend to do.
This system provides automatic control of:
- Cutting platform (stubble) height
- Lateral tilt
- Platform ground pressure
The automatic-control, programmable header functions provide optimum performance and operator ease and comfort.
The 618PremiumFlow and 620PremiumFlow have two sensor plates, one per side.