740DCombine Header
- 12,20 m Cutting width
- 1016 mm Draper belt width with rigid knife
- 0 - 223 m/min Draper Speed
- Dual Knife Drive with 1960 cuts/min (Optional)
- Dual gauge wheels, optional
The combination of HydraFloat header height sensing with the suspension system and double-cut knives, enables faster harvesting with lower ground pressure and consistend stubble height.
For harvesting rapeseed a larger 460mm top conveying auger is available as well as a centre section sealing kit. Rapeseed side knives can also be fitted.
Specifications | ||||
---|---|---|---|---|
John Deere 740D Combine Header |
Cutterbar length | 12.2 m 40 ft |
|||
---|---|---|---|---|
Knife drive | Base: dual knife | |||
Knife speed | 490 cycles/min | |||
Pickup reel operating speeds | 6-54 rpm | |||
Draper belts speed control | Hydraulic from cab |
Type | Rigid draper |
---|
Type | Straight-line knife drive system | |||
---|---|---|---|---|
Length | 12.3 m 40.5 ft |
|||
Knife drive | Base: dual knife | |||
Knife speed | 490 cycles/min | |||
Cutterbar tilt | Base: hydraulic, maximum tilt 9 degree (angle) | |||
Base skid shoe height |
Number of slats | Six bat poly base | |||
---|---|---|---|---|
Fingers | Nylon | |||
Diameter | 1.067 m 3.5 ft |
|||
Height control | Hydraulic | |||
Speed control | Hydraulic | |||
Reel lift | Cylinder stroek: 330 mm 13 in. Total range: 391.5 mm 15.4 in. |
|||
Reel fore and aft | Cylinder stroke: 359 mm 14.1 in. Total range: 620 mm 24.4 in. |
|||
Reel resume | Base | |||
Reel reverse | Base | |||
Operating speeds | 6-70 rpm | |||
Operating speeds (54-in. reel) |
Width | Side belts: 1.02 mm 3.33 ft Center belts: 1.4 m 4.583 ft Center belt not included with SPW configuration |
|||
---|---|---|---|---|
Belt depth | ||||
Cleat height | Cleats: 25.4 mm 1 in. |
|||
Operating speed | Side belts: variable up to 223 m/min 735 fpm Center belts: 240 m/min 787 fpm Center belt not included with SPW configuration |
|||
Speed control | Hydraulic from cab | |||
Center belt reverse | Base Center belt not included with SPW configuration |
Diameter | Two facory installed options: 406 mm 16 in. 356 mm 14 in. Feed drum not included with SPW configuration |
|||
---|---|---|---|---|
Feed drum fingers | Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in. |
|||
Number of fingers | 18 | |||
Auger finger platform | Dual chevron, retracting | |||
Finger reach | 152 mm 6 in. |
|||
Drum/auger reverse | Base | |||
Operating speed, rpm | 196 rpm | |||
Center cleanout door | Base |
Type | Base: electrohydraulic | |||
---|---|---|---|---|
Header height sensing on the ground | Base | |||
Header height sensing off the ground | Base |
Type | Optional: hydraulic drive | |||
---|---|---|---|---|
Fingered augers | ||||
Size |
Overall width | ||||
---|---|---|---|---|
Platform length | 13.1 m 42.9 ft |
|||
Overall operating depth | 2.5 m 8.2 ft |
|||
Transport width, field position | 12.95 m 42.5 ft |
|||
Transport width on wheel, less dividers | 2.7 m 8.9 ft |
|||
Transport length, hitch extended | 15.4 m 50.4 ft |
Approximate weight (slat reel) | ||||
---|---|---|---|---|
Approximate weight (pickup reel) | 4,082 kg 9,000 lb |
|||
Approximate weight (with transport) | Combine only: 3,967 kg 8,746 lb SPW only: 3,367 kg 7,423 lb |
|||
Approximate weight (optional 54-in. reel) |
Date collected |
---|