725DCombine Header
- 7,60 m Cutting width
- 1016 mm Draper belt width with rigid knife
- 0 - 223 m/min Draper Speed
- Dual Knife Drive with 1960 cuts/min (Optional)
The combination of HydraFloat header height sensing with the suspension system and double-cut knives, enables faster harvesting with lower ground pressure and consistend stubble height.
For harvesting rapeseed a larger 460mm top conveying auger is available as well as a centre section sealing kit. Rapeseed side knives can also be fitted.
Specifications | ||||
---|---|---|---|---|
John Deere 725D Combine Header |
Cutterbar length | 7.6 m 25 ft |
|||
---|---|---|---|---|
Knife drive | Combine use only; Base: Single Optional: Dual knife SPW only or SPW/combine combination use: Base: Dual knife |
|||
Knife speed | 490 cycles/min | |||
Pickup reel operating speeds | 6-54 rpm 137.2-cm (54-in.) reel: 5-44 rpm |
|||
Draper belts speed control | Hydraulic from cab |
Type | Rigid draper |
---|
Type | Straight-line knife drive system | |||
---|---|---|---|---|
Length | 7.8 m 25.5 ft |
|||
Knife drive | Combine use only: Base: Single Optional: Dual knife SPW only or SPW/combine combination use: Base: Dual knife |
|||
Knife speed | 490 cycles/min | |||
Cutterbar tilt | Base: hydraulic, maximum tilt 9 degree (angle) | |||
Base skid shoe height |
Number of slats | Base: Six bat poly Optional: Eight bat steel (for forage conditions) |
|||
---|---|---|---|---|
Fingers | Base: Nylon Optional: steel (typically used in rice or forage conditions) |
|||
Diameter | 1.067 m 3.5 ft For rice or forage conditions: 1.371 ft 4.5 ft |
|||
Height control | Hydraulic | |||
Speed control | Hydraulic | |||
Reel lift | Cylinder stroke: 330 mm 13 in. Total range: 391.5 mm 15.4 in. |
|||
Reel fore and aft | Cylinder stroke: 359 mm 14.1 in. Total range: 620 mm 24.4 in. |
|||
Reel resume | Base | |||
Reel reverse | Base | |||
Operating speeds | 6-70 rpm | |||
Operating speeds (54-in. reel) | 5-44 rpm |
Width | Side belts: 1.02 m 3.33 ft Center belts: 1.4 m 4.583 ft Center belts not included with SPW configuration |
|||
---|---|---|---|---|
Belt depth | ||||
Cleat height | 25.4 mm 1 in. |
|||
Operating speed | Side belts: variable up to 223 m/min 735 fpm Center belts: 240 m/min 787 fpm Ceenter belt not included with SPW configuration |
|||
Speed control | Hydraulic from cab | |||
Center belt reverse | Base Center belt not included with SPW configuration |
Diameter | Two factory installed options: 406 mm 16 in. 356 mm 14 in. Feed drum not included with SPW configuration |
|||
---|---|---|---|---|
Feed drum fingers | Steel, heavy-duty, and round with breakaway notch and retainer Diameter: 16 mm 0.625 in. |
|||
Number of fingers | 18 | |||
Auger finger platform | Dual chevron, retracting | |||
Finger reach | 152 mm 6 in. |
|||
Drum/auger reverse | Base | |||
Operating speed, rpm | 195 rpm | |||
Center cleanout door | Base |
Type | Base: electrohydraulic | |||
---|---|---|---|---|
Header height sensing on the ground | Base | |||
Header height sensing off the ground |
Type | Optional: hydraulic drive | |||
---|---|---|---|---|
Fingered augers | ||||
Size |
Overall width | ||||
---|---|---|---|---|
Platform length | 8.5 m 27.9 ft |
|||
Overall operating depth | 2.4 m 7.9 ft |
|||
Transport width, field position | 8.1 m 26.5 ft |
|||
Transport width on wheel, less dividers | ||||
Transport length, hitch extended |
Approximate weight (slat reel) | ||||
---|---|---|---|---|
Approximate weight (pickup reel) | 3,000 kg 6,613 lb |
|||
Approximate weight (with transport) | ||||
Approximate weight (optional 54-in. reel) | Combine only: 2,974 kg 6,556 lb SPW: only: 2,374 kg 5,234 lb |
Date collected |
---|