620RCombine Header
- 6,10 m cutting width
- Table length: 400 to 570 mm (manually adjustable)
- 660 mm Ø Auger
- Cutter bar with 980 strokes/min
- 2 Automatic Height Control Sensors
The table length can be adjusted mechanically to the crop type and conditions and there are up to 3 sensing skid plates for automatic header height control. Heavy duty chains and a powerful slip clutch protect the drive in the event of plugging. Bottom protection plates avoid stone damage and the knife gearbox is maintenance-free for a long service life.
It’s easy to adapt the 600R for both rapeseed and sunflower harvesting and only takes around 20 minutes.
Specifications | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere 620R Combine Header |
Cutterbar type | Planetary knife drive | |||
---|---|---|---|---|
Cutterbar length | 40.5, 45.5, 57.5 cm 16, 18, 23 in. |
|||
Knife speed | 490 spm 980 cuts/minute |
|||
Reel height control | Hydraulic | |||
Reel speed control | Hydraulic | |||
Platform auger diameter | 66 cm 26 in. |
|||
Platform auger operating speed | Slow down: 152, 135 rpm Speed up: 170 rpm |
|||
Cutting width | 6.1 m 20 ft |
|||
Overall width | 6.42 m 21.08 ft |
Type | Planetary knife drive | |||
---|---|---|---|---|
Knife stroke | 8.9 cm 3.5 in. |
|||
Cutterbar length | 40.5, 45.5, 57.5 cm 16, 18, 23 cm |
|||
Tilt adjustment | Located on feederhouse: 17 degree (angle) | |||
Knife sections | Heavy-duty, over-serrated | |||
Guards | Forged steel, heat-treated | |||
Knife speed | 490 spm 980 cuts/minute |
Number of slats | Six | |||
---|---|---|---|---|
Diameter | 1.1 m 3.61 ft |
Height control | Hydraulic | |||
---|---|---|---|---|
Speed control | Hydraulic | |||
Operating speeds | 5-44 rpm |
Diameter | 66 cm 26 in. |
|||
---|---|---|---|---|
Operating speed | Slow down: 152, 135 rpm Speed up: 170 rpm |
|||
Auger flighting | 12.5 cm 4.9 in. |
|||
Auger flighting pitch | 60 cm 23.6 in. |
|||
Auger adjustment | Manually up/down Manually fore/aft |
Cutting width | 6.1 m 20 ft |
|||
---|---|---|---|---|
Overall width | 6.42 m 21.083 ft |
|||
Total platform length without dividers | 2.3 m 7.58 ft |
|||
Approximate weight | 2,150 kg 4,740 lb |
|||
Approximate weight with rape extension | ||||
Table length with rape extension (knife tip to auger skin) | 133, 138, 140 cm 52.4, 54.3, 55.1 in. |
|||
Rape extension type | Zürn RapsProfi II |
Date collected |
---|