The John Deere 700D Series combine header is a rigid knife draper belt header available in 4 widths from 7.60 to 12.20m.
Cutting is fast and clean thanks to the combination of the dual-knife system and double-cut knives, so you can harvest at higher ground speeds. The cutterbar is also split into two halves which are driven by synchronised motors to reduce vibration.
The speed of the side belts can be adjusted directly from the cab to suit the combine’s ground speed. The 25mm deep cleats provide better crop engagement for consistent transport to the center feed drum. The header angle and cutting height can be adjusted on the go from the cab. With a cut height as low as 38mm it’s ideal if you want a clean field, or you’re picking up laid or low growing crops.
The HydraFloat header height sensing and suspension cylinders in the attachment frame allow independent movement of the combine and header. Adjustable directly from the cab, HydraFloat and the gauge wheels work together to help provide a consistent stubble height.
Depending on local road regulations, the support gauge wheels can be converted to transport the header without the use of tools.